Re: [hylafax-users] Multi-Modem Card Compatability

["andrew rinaldi" <andrew.rinaldi@xxxxxxxxxxxx>]

Hi Andrew.

The SCINTRA products only support V.17 (14k4 bps) which if you are using 8
lines is going to cost you a lot of money over time.  It's also based on an
ancient Conexant chipset which might give you issues with warranty in the
future.

Regards

ANDREW RINALDI
Mainpine Ltd. Support
USA +1 718 701 2422 | Asia/Europe +44 1225 436137 
andrew.rinaldi@xxxxxxxxxxxx | www.mainpine.com  

-----Original Message-----
From: hylafax-users-bounce@xxxxxxxxxxx
[mailto:hylafax-users-bounce@xxxxxxxxxxx] On Behalf Of Andrew Kelly
Sent: 04 July 2006 02:12
To: hylafax-users@xxxxxxxxxxx
Subject: [hylafax-users] Multi-Modem Card Compatability

Has anybody had experience in using multi-modem cards with Hylafax? Their
website mentions only the Comtrol RocketModem cards which I can't find
available here in Australia.

I am thinking of getting a NetComm SCINTRA600 card, which supports up to 8
modem modules. NetComm supply drivers for Linux (Kernel 2.4 or later) so I
guess it works under Linux. However I'd really like to know if that
particular card, or any others that people know of, work with Hylafax. I
don't want to fork out over $1200 for a piece of hardware that isn't
compatible.

I'd be interested to hear about any experiences (good or bad) with any brand
of multi-modem card under Hylafax.

Cheers,
Andy


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*




____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*