![]() |
How do I know for sure? I did configure inittab to have this: t0:23:respawn:/usr/sbin/faxgetty ttyG0 t1:23:respawn:/usr/sbin/faxgetty ttyG1 t2:23:respawn:/usr/sbin/faxgetty ttyG2 t3:23:respawn:/usr/sbin/faxgetty ttyG3 t4:23:respawn:/usr/sbin/faxgetty ttyG4 t5:23:respawn:/usr/sbin/faxgetty ttyG5 t6:23:respawn:/usr/sbin/faxgetty ttyG6 t7:23:respawn:/usr/sbin/faxgetty ttyG7 But I also ran "faxmodem ttyG0" etc. Is this bad, does it conflict??? Note that this is a "send-only" environment. Thanks -----Original Message----- From: Bojan Stojanovic [mailto:bojan.stojanovic@xxxxxxxxxxxxx] Sent: Tuesday, 30 May 2006 6:30 PM To: Peter Verhoeven Cc: hylafax-users@xxxxxxxxxxx Subject: Re: [hylafax-users] no devices showing in faxstat Do You use faxgetty to control the modems? On Tue, 2006-05-30 at 16:44 +1000, Peter Verhoeven wrote: > This is my second time round installing a hylafax setup, this time > with Digi Acceleport Xp board with 8 modems. > > > > Hylafax runs ok, the Digi drivers are installed (I'm running > Mandrake), faxaddmodem talks to the modems fine, I've edited inittab > for each device (ttyG0_00 -> ttyG0_07), but when I do faxstat I just > get "HylaFAX scheduler on localhost: Running", but not the normal list > of Modems with each status. > > > > Any ideas? > > > > Thanks. > > > > > Disclaimer > > **************************************************************************** ** > > This message contains privileged and confidential information intended > only for the use of the addressee named above. If you are not the > intended recipient of this message, you are hereby notified that you > must not disseminate, copy, or take any action in reliance on it. If > you have received this message in error, please notify Morris > International immediately and delete all copies. Any views expressed > in this message are those of the individual sender, except where the > sender specifically states them to be the views of Morris > International. > > **************************************************************************** ** > Disclaimer **************************************************************************** ** This message contains privileged and confidential information intended only for the use of the addressee named above. If you are not the intended recipient of this message, you are hereby notified that you must not disseminate, copy, or take any action in reliance on it. If you have received this message in error, please notify Morris International immediately and delete all copies. Any views expressed in this message are those of the individual sender, except where the sender specifically states them to be the views of Morris International. **************************************************************************** ** ____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*