Re: [hylafax-users] Problems upgrading

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

mnoel@xxxxxxxxxxx wrote:

> May 26 09:50:32.84: [ 1729]: <-- [9:AT+FRH=3\r]
> May 26 09:50:32.84: [ 1729]: --> [7:CONNECT]
> May 26 09:50:33.10: [ 1729]: --> HDLC<8:FF C8 C1 00 47 1E 36 71>
> May 26 09:50:33.10: [ 1729]: --> [2:OK]
> May 26 09:50:33.10: [ 1729]: REMOTE wants 14400 bit/s
> May 26 09:50:33.10: [ 1729]: REMOTE wants A4 page width (215 mm)
> May 26 09:50:33.10: [ 1729]: REMOTE wants unlimited page length
> May 26 09:50:33.10: [ 1729]: REMOTE wants 7.7 line/mm
> May 26 09:50:33.10: [ 1729]: REMOTE wants 2-D MMR
> May 26 09:50:33.10: [ 1729]: REMOTE wants T.30 Annex A, 64-byte ECM
> May 26 09:50:33.10: [ 1729]: RECV training at v.17 14400 bit/s


The DCS signal was interpreted incorrectly.  You probably have

 Class1FrameOverhead:   2

in your modem config file.  Please disable/delete this and restart 
faxgetty.  It was only appropriate in t38modem prior to 0.7.0.

I'm not exactly sure, though, why things work for you in 4.2.0 ... 
probably due to some lucky-for-you bug in 4.2.0.

Thanks,

Lee.


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*