[hylafax-users] Problems upgrading

[mnoel@xxxxxxxxxxx]

I am trying to upgrade Hylafax from 4.2.0 to 4.3.0 and am running into problems.  For our system we use a bank of t38modems for sending and receiving calls.

 

To do the upgrade I ran rpm -Uvh hylafax-4.3.0-1rhel3.i386.rpm.  After this was done I made sure that the etc/FaxDispatch and etc/hosts.hfaxd files were the same as the were before I did the upgrade.  I also ensured that all of the FIFOs set up for the t38modems and all of the etc/config.* files for the modems were still there and unchanged.

 

I restarted the t38modem, all of the faxgettys, and hfaxd (twice, actually).

 

Now the fax server isn't taking incoming calls correctly.  An incoming call will be answered but things fall down quickly after that.  Below is the comm log for one of the incoming calls.  Although it shouldn't matter, the sending fax machine is Hylafax 4.2.0 also using a t38modem. 

 

After doing this install once I rolled everything back to my 4.2.0 environment and then everything worked.  I reinstalled 4.3.0 and had the same problem. 

 

I'm sure I'm just missing something simple but I can't figure it out. Any ideas?

 

-Mike Noel

 

May 26 09:50:22.68: [ 1729]: SESSION BEGIN 000049034
May 26 09:50:22.68: [ 1729]: HylaFAX (tm) Version 4.3.0
May 26 09:50:22.68: [ 1729]: CallID: "3798" "4803663780"
May 26 09:50:22.68: [ 1729]: <-- [4:ATA\r]
May 26 09:50:27.05: [ 1729]: --> [7:CONNECT]
May 26 09:50:27.05: [ 1729]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyx3'
May 26 09:50:27.05: [ 1729]: STATE CHANGE: ANSWERING -> RECEIVING
May 26 09:50:27.05: [ 1729]: RECV FAX: begin
May 26 09:50:27.05: [ 1729]: <-- HDLC<32:FF C0 04 B5 00 AA 12 9E 36 86 62 82 1A 04 14 2E B6 94 04 6A A6 4E CE 96 F6 76 04 2C 74 CC 74 0C>
May 26 09:50:27.05: [ 1729]: <-- data [32]
May 26 09:50:27.05: [ 1729]: <-- data [2]
May 26 09:50:28.94: [ 1729]: --> [7:CONNECT]
May 26 09:50:28.94: [ 1729]: <-- HDLC<23:FF C0 02 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04>
May 26 09:50:28.94: [ 1729]: <-- data [23]
May 26 09:50:28.94: [ 1729]: <-- data [2]
May 26 09:50:29.66: [ 1729]: --> [7:CONNECT]
May 26 09:50:29.66: [ 1729]: <-- HDLC<13:FF C8 01 00 77 5F 23 01 FB C1 01 01 18>
May 26 09:50:29.66: [ 1729]: <-- data [13]
May 26 09:50:29.66: [ 1729]: <-- data [2]
May 26 09:50:30.15: [ 1729]: --> [2:OK]
May 26 09:50:30.15: [ 1729]: <-- [9:AT+FRH=3\r]
May 26 09:50:31.27: [ 1729]: --> [7:CONNECT]
May 26 09:50:32.84: [ 1729]: --> HDLC<25:FF C0 C2 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 89 69>
May 26 09:50:32.84: [ 1729]: --> [2:OK]
May 26 09:50:32.84: [ 1729]: REMOTE TSI ""
May 26 09:50:32.84: [ 1729]: <-- [9:AT+FRH=3\r]
May 26 09:50:32.84: [ 1729]: --> [7:CONNECT]
May 26 09:50:33.10: [ 1729]: --> HDLC<8:FF C8 C1 00 47 1E 36 71>
May 26 09:50:33.10: [ 1729]: --> [2:OK]
May 26 09:50:33.10: [ 1729]: REMOTE wants 14400 bit/s
May 26 09:50:33.10: [ 1729]: REMOTE wants A4 page width (215 mm)
May 26 09:50:33.10: [ 1729]: REMOTE wants unlimited page length
May 26 09:50:33.10: [ 1729]: REMOTE wants 7.7 line/mm
May 26 09:50:33.10: [ 1729]: REMOTE wants 2-D MMR
May 26 09:50:33.10: [ 1729]: REMOTE wants T.30 Annex A, 64-byte ECM
May 26 09:50:33.10: [ 1729]: RECV training at v.17 14400 bit/s
May 26 09:50:33.10: [ 1729]: <-- [11:AT+FRM=145\r]
May 26 09:50:34.88: [ 1729]: --> [7:CONNECT]
May 26 09:50:36.41: [ 1729]: RECV: TCF 2796 bytes, 0% non-zero, 2782 zero-run
May 26 09:50:36.41: [ 1729]: --> [10:NO CARRIER]
May 26 09:50:36.41: [ 1729]: <-- [9:AT+FRS=7\r]
May 26 09:50:36.49: [ 1729]: --> [2:OK]
May 26 09:50:36.49: [ 1729]: TRAINING succeeded
May 26 09:50:36.49: [ 1729]: <-- [9:AT+FTH=3\r]
May 26 09:50:36.49: [ 1729]: --> [7:CONNECT]
May 26 09:50:36.49: [ 1729]: <-- HDLC<3:FF C8 21>
May 26 09:50:36.49: [ 1729]: <-- data [3]
May 26 09:50:36.49: [ 1729]: <-- data [2]
May 26 09:50:37.56: [ 1729]: --> [2:OK]
May 26 09:50:37.56: [ 1729]: <-- [11:AT+FRM=146\r]
May 26 09:50:38.99: [ 1729]: --> [7:CONNECT]
May 26 09:50:38.99: [ 1729]: MODEM input buffering enabled
May 26 09:50:39.23: [ 1729]: HDLC frame too short (1 bytes)
May 26 09:50:39.23: [ 1729]: HDLC frame with bad address field 0xc4
May 26 09:50:39.23: [ 1729]: HDLC frame too short (1 bytes)
May 26 09:50:39.31: [ 1729]: HDLC frame not byte-oriented.  Trailing byte: 0xc0
May 26 09:50:39.31: [ 1729]: HDLC frame too short (1 bytes)
May 26 09:50:39.31: [ 1729]: Bad HDLC terminating flag received.
May 26 09:50:39.39: [ 1729]: HDLC frame too short (1 bytes)
May 26 09:50:39.39: [ 1729]: HDLC frame not byte-oriented.  Trailing byte: 0xc0
May 26 09:50:39.39: [ 1729]: Bad HDLC terminating flag received.
May 26 09:50:39.47: [ 1729]: HDLC frame not byte-oriented.  Trailing byte: 0x80
May 26 09:50:39.47: [ 1729]: HDLC frame not byte-oriented.  Trailing byte: 0x80
May 26 09:50:39.47: [ 1729]: Bad HDLC terminating flag received.
May 26 09:50:39.47: [ 1729]: HDLC frame not byte-oriented.  Trailing byte: 0xfe
May 26 09:50:39.55: [ 1729]: HDLC frame not byte-oriented.  Trailing byte: 0x80
May 26 09:50:39.63: [ 1729]: HDLC frame not byte-oriented.  Trailing byte: 0
May 26 09:50:39.63: [ 1729]: Bad HDLC terminating flag received.
May 26 09:50:39.63: [ 1729]: HDLC frame not byte-oriented.  Trailing byte: 0xf0
May 26 09:50:39.71: [ 1729]: HDLC frame not byte-oriented.  Trailing byte: 0xfc
May 26 09:50:39.87: [ 1729]: HDLC frame length invalid.
May 26 09:50:40.11: [ 1729]: HDLC frame not byte-oriented.  Trailing byte: 0xc0
May 26 09:50:40.11: [ 1729]: Bad HDLC terminating flag received.
May 26 09:50:40.75: [ 1729]: Bad HDLC terminating flag received.
May 26 09:50:40.83: [ 1729]: HDLC frame with bad address field 0xba
May 26 09:50:40.83: [ 1729]: HDLC frame not byte-oriented.  Trailing byte: 0xfc
May 26 09:50:41.07: [ 1729]: HDLC frame not byte-oriented.  Trailing byte: 0x80
May 26 09:50:41.07: [ 1729]: HDLC frame with bad address field 0xee
May 26 09:50:41.07: [ 1729]: HDLC frame not byte-oriented.  Trailing byte: 0
May 26 09:50:41.39: [ 1729]: Bad HDLC terminating flag received.
May 26 09:50:41.47: [ 1729]: Bad HDLC terminating flag received.
May 26 09:50:41.47: [ 1729]: Bad HDLC terminating flag received.
May 26 09:50:41.47: [ 1729]: Bad HDLC terminating flag received.
May 26 09:50:42.91: [ 1729]: Bad HDLC terminating flag received.
May 26 09:50:44.67: [ 1729]: HDLC frame not byte-oriented.  Trailing byte: 0xf0
May 26 09:50:44.67: [ 1729]: Bad HDLC terminating flag received.
May 26 09:50:44.75: [ 1729]: Bad HDLC terminating flag received.
May 26 09:50:44.83: [ 1729]: Bad HDLC terminating flag received.
May 26 09:50:44.91: [ 1729]: Bad HDLC terminating flag received.
May 26 09:50:45.07: [ 1729]: Bad HDLC terminating flag received.
May 26 09:50:45.07: [ 1729]: Bad HDLC terminating flag received.
May 26 09:50:45.23: [ 1729]: HDLC frame with bad address field 0xd0
May 26 09:50:45.31: [ 1729]: Bad HDLC terminating flag received.
May 26 09:50:45.63: [ 1729]: HDLC frame not byte-oriented.  Trailing byte: 0xfc
May 26 09:50:45.95: [ 1729]: Bad HDLC terminating flag received.
May 26 09:50:46.03: [ 1729]: Bad HDLC terminating flag received.
May 26 09:50:46.19: [ 1729]: Bad HDLC terminating flag received.
May 26 09:50:46.35: [ 1729]: Bad HDLC terminating flag received.
May 26 09:50:46.35: [ 1729]: Bad HDLC terminating flag received.
May 26 09:50:46.43: [ 1729]: HDLC frame not byte-oriented.  Trailing byte: 0xfc
May 26 09:50:46.83: [ 1729]: HDLC frame not byte-oriented.  Trailing byte: 0xfc
May 26 09:50:47.15: [ 1729]: HDLC frame not byte-oriented.  Trailing byte: 0xfc
May 26 09:50:47.23: [ 1729]: Bad HDLC terminating flag received.
May 26 09:50:47.23: [ 1729]: Bad HDLC terminating flag received.
May 26 09:50:47.31: [ 1729]: Bad HDLC terminating flag received.
May 26 09:50:47.47: [ 1729]: Bad HDLC terminating flag received.
May 26 09:50:47.55: [ 1729]: HDLC frame not byte-oriented.  Trailing byte: 0xc0
May 26 09:50:47.55: [ 1729]: HDLC frame with bad address field 0xc3
May 26 09:50:47.63: [ 1729]: Bad HDLC terminating flag received.
May 26 09:50:47.63: [ 1729]: HDLC frame with bad address field 0xed
May 26 09:50:47.87: [ 1729]: HDLC frame not byte-oriented.  Trailing byte: 0xc0
May 26 09:50:47.87: [ 1729]: Bad HDLC terminating flag received.
May 26 09:50:47.95: [ 1729]: Bad HDLC terminating flag received.
May 26 09:50:48.59: [ 1729]: RECV assumed RCP frame with block end
May 26 09:50:48.59: [ 1729]: MODEM input buffering disabled
May 26 09:50:48.59: [ 1729]: --> [10:NO CARRIER]
May 26 09:50:48.59: [ 1729]: <-- [9:AT+FRH=3\r]
May 26 09:50:48.89: [ 1729]: --> [7:CONNECT]
May 26 09:50:49.96: [ 1729]: --> HDLC<5:FF C8 F4 CC 66>
May 26 09:50:49.96: [ 1729]: --> [2:OK]
May 26 09:50:49.96: [ 1729]: RECV recv EOP (no more pages or documents)
May 26 09:50:49.96: [ 1729]: RECV FAX:
May 26 09:50:49.96: [ 1729]: RECV FAX (000049034): recvq/fax000048841.tif from , route to <unspecified>, 0 pages in 0:22
May 26 09:50:49.96: [ 1729]: <-- [9:AT+FTH=3\r]
May 26 09:50:49.96: [ 1729]: --> [7:CONNECT]
May 26 09:50:49.96: [ 1729]: <-- HDLC<3:FF C8 5F>
May 26 09:50:49.96: [ 1729]: <-- data [3]
May 26 09:50:49.96: [ 1729]: <-- data [2]
May 26 09:50:51.11: [ 1729]: --> [2:OK]
May 26 09:50:51.11: [ 1729]: MODEM input buffering enabled
May 26 09:50:51.11: [ 1729]: RECV FAX: bin/faxrcvd "recvq/fax000048841.tif" "ttyx3" "000049034" "" "3798" "4803663780"
May 26 09:50:51.12: [ 1729]: RECV FAX: end
May 26 09:50:51.12: [ 1729]: SESSION END

 

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*