Re: [hylafax-users] pagesend

[Tony Delov <Tony.Delov@xxxxxxxxxxxxxxx>]

Lee Howard wrote:
> Tony Delov wrote:
>
> > May 19 14:23:23 hylafax PageSend[6270]: <-- [5:ATM0\r]
> > May 19 14:23:24 hylafax PageSend[6270]: --> [2:OK]
> > May 19 14:23:24 hylafax PageSend[6270]: MODEM set parity: 7 bits, 
> > even parity
> > May 19 14:23:24 hylafax PageSend[6270]: MODEM tcsetattr: Invalid 
> > argument 
>
>
> Either your modem or your OS doesn't seem to like setting the parity 
> to 7bits, even parity via tcsetattr in the way that we are.
>
> See 'man hylafax-info' about pagerTTYParity.  Try changing the info 
> file entry between "even", "odd", and "none" ... and see if any of 
> those have an effect.  If not, then it's probably an OS-specific issue 
> that's going to require some code work to HylaFAX to fix.

I'm wondering if its even reading the info file?
I made a the changes as suggested, but they all come up as "set parity: 
7 bits, even parity".
I didn't re-start the server after altering the phone number info. Would 
that be an issue?


&pagerPassword:"XXXXX"
&pagerTTYParity:"even"
&pagingProtocol:"ixo"

Set to "even":
May 22 11:36:27 hylafax PageSend[27753]: MODEM set parity: 7 bits, even 
parity
May 22 11:36:27 hylafax PageSend[27753]: MODEM tcsetattr: Invalid argument
May 22 11:36:27 hylafax PageSend[27753]: STATE CHANGE: BASE -> MODEMWAIT 
(timeout 30)
May 22 11:43:12 hylafax PageSend[28814]: MODEM set parity: 7 bits, even 
parity
May 22 11:43:12 hylafax PageSend[28814]: MODEM tcsetattr: Invalid argument


set to odd
&pagerPassword:"XXXXX"
&pagerTTYParity:"odd"
&pagingProtocol:"ixo"
May 22 11:50:23 hylafax PageSend[30441]: MODEM set parity: 7 bits, even 
parity
May 22 11:50:23 hylafax PageSend[30441]: MODEM tcsetattr: Invalid argument
May 22 11:50:23 hylafax PageSend[30441]: STATE CHANGE: BASE -> MODEMWAIT 
(timeout 30)

May 22 11:52:11 hylafax PageSend[30441]: MODEM set baud rate: 0 baud 
(flow control unchanged)
May 22 11:52:11 hylafax PageSend[30441]: MODEM tcsetattr: Invalid argument
May 22 11:52:11 hylafax PageSend[30441]: DELAY 75 ms

set to none
&pagerPassword:"XXXXX"
&pagerTTYParity:"none"
&pagingProtocol:"ixo"
May 22 13:36:24 hylafax PageSend[23955]: MODEM tcsetattr: Invalid argument
May 22 13:36:24 hylafax PageSend[23955]: DELAY 75 ms
May 22 13:36:24 hylafax PageSend[23955]: MODEM set DTR ON
May 22 13:36:24 hylafax PageSend[23955]: DELAY 2600 ms
May 22 13:36:28 hylafax PageSend[23955]: MODEM set baud rate: 38400 
baud, input flow RTS/CTS, output flow RTS/CTS
May 22 13:36:28 hylafax PageSend[23955]: MODEM tcsetattr: Invalid argument
May 22 13:36:28 hylafax PageSend[23955]: MODEM set DTR OFF
May 22 13:36:28 hylafax PageSend[23955]: MODEM set baud rate: 0 baud 
(flow control unchanged)
May 22 13:36:28 hylafax PageSend[23955]: MODEM tcsetattr: Invalid argument
May 22 13:36:28 hylafax PageSend[23955]: DELAY 75 ms
May 22 13:36:28 hylafax PageSend[23955]: MODEM set DTR ON
May 22 13:36:28 hylafax PageSend[23955]: DELAY 2600 ms
May 22 13:36:32 hylafax PageSend[23955]: MODEM set baud rate: 38400 
baud, input flow RTS/CTS, output flow RTS/CTS
May 22 13:36:32 hylafax PageSend[23955]: MODEM tcsetattr: Invalid argument

Thanks
Tony D

Attention:
The information contained in this message and or attachments is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material.  Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete the material from any system and destroy any copies.

Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of The Gribbles Group.

Thank You.

Whilst every effort has been made to ensure that this e-mail message and any attachments are free from viruses, you should scan this message and any attachments.
Under no circumstances do we accept liability for any loss or damage which may result from your receipt of this message or any attachment.

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*