![]() |
-- Anderson Alipio anderson@xxxxxxxxxxx
Anderson Alipio wrote:
When hylafax dial to some other fax, it "ask" for the fax with a voice message, eg: "Fax please" or some like that.
does anyone know how to do it?
1. Make sure that you're using a fax+voice capable modem. (AT+FCLASS=? response should include "8" or "8.0".)
2. Install HylaFAX from http://hylafax.sourceforge.net. 4.3.0.2 will do fine.
3. Then use the <play:C> escape command. Here's what 'man hylafax-config' has to say about it:
The ‘‘<play:C>’’ escape can be used to play a raw audio file with a voice modem. The files are named
etc/playC.raw where ‘‘C’’ is any character. This feature can be used, for example, to play a brief audio
message after picking up the line but before answering. A configuration example may be:
ModemRingResponse: "AT+FCLASS=8;H1\nAT+VSM=131\nAT+VLS=1\nAT+VTX\n<waitfor:CONNECT><play:1><waitfor:OK>AT+VTS=[933,,150]"
ModemAnswerCmd: "<delay:100>AT+FCLASS=1;A" CallIDPattern: SHIELDED_DTMF CallIDAnswerLength: 4
In this example using an IS-101 voice-compliant modem, a RING indication from the modem will cause the modem
to be placed in voice mode, set ulaw audio compression, and via the connected phone line play back the
etc/play1.raw audio file, which may say, "After the tone enter a four-digit extension, then start the fax."
Following the message a tone is played.
Lee.
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*