HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] Problem Faxing To Brother NSC/IntelliFax



Nothing clear is being indicated by these session logs other than what we already know.

Can you confirm that this only happens in some instances with Brother fax machines when MMR is used?

Can you confirm that this never happens with those same receivers when MMR is used but when 'sendfax -2' was used?

Thanks,

Lee.

pelmgreen@xxxxxxxxxxxxxxxxx wrote

Hi

Finally, I was able to arrange an upgrade of the server software - hylafax
is now running 4.2.5.5

After the upgrade, a few transmissions (incl coverpage) were done but
clients still complain about partial pages received, although the c00000xxx
report successful transmissions.
see attached

Unless anything obvoius can be derived from the logs - the clients are
prepared to help in testing
Please advice how to debug this

Thanks
Per Elmgreen










----- Original Message ----- From: "Lee Howard" <faxguy@xxxxxxxxxxxxxxxx> To: <pelmgreen@xxxxxxxxxxxxxxxxx> Cc: <hylafax-users@xxxxxxxxxxx> Sent: Wednesday, January 25, 2006 6:20 PM Subject: Re: [hylafax-users] Problem Faxing To Brother NSC/IntelliFax




For the moment the coverpage issue is clouding things up. Please do not
use a coverpage. Without the coverpage does the 'sendfax -2' work every
time? Without the 'sendfax -2' it consistently fails somewhere in the


fax?


Thanks,

Lee.


pelmgreen@xxxxxxxxxxxxxxxxx wrote:




Thanks for your reply,

I've been able to test with a document (.ps) (2pages) that consistently
fails
the document is produced using htmldoc 1.8.24 (html->ps)

ModemSoftRTFCC is not set in config.ttyS0 so the default (yes?) is in use

Sending 3 pages(incl. coverpage)

Using sendfax -2 actually transmit all pages ok but the coverpage fails

Without using -2
Faxing the same document  3 times gave a different result
Coverpage ok every time
Either 1st or 2nd page got cut 1/5 to 1/2 down the page

c00000xxx all report successful transmission

What next?

Many thanks
Pete




____________________ HylaFAX(tm) Users Mailing List


_______________________


To subscribe/unsubscribe, click


http://lists.hylafax.org/cgi-bin/lsg2.cgi


On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx <


/dev/null


*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*











____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*




Project hosted by iFAX Solutions