HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] Problem Faxing To Brother NSC/IntelliFax



Hi

Finally, I was able to arrange an upgrade of the server software - hylafax
is now running 4.2.5.5

After the upgrade, a few transmissions (incl coverpage) were done but
clients still complain about partial pages received, although the c00000xxx
report successful transmissions.
see attached

Unless anything obvoius can be derived from the logs - the clients are
prepared to help in testing
Please advice how to debug this

Thanks
Per Elmgreen










----- Original Message -----
From: "Lee Howard" <faxguy@xxxxxxxxxxxxxxxx>
To: <pelmgreen@xxxxxxxxxxxxxxxxx>
Cc: <hylafax-users@xxxxxxxxxxx>
Sent: Wednesday, January 25, 2006 6:20 PM
Subject: Re: [hylafax-users] Problem Faxing To Brother NSC/IntelliFax


> For the moment the coverpage issue is clouding things up.  Please do not
> use a coverpage.  Without the coverpage does the 'sendfax -2' work every
> time?  Without the 'sendfax -2' it consistently fails somewhere in the
fax?
>
> Thanks,
>
> Lee.
>
>
> pelmgreen@xxxxxxxxxxxxxxxxx wrote:
>
> >Thanks for your reply,
> >
> >I've been able to test with a document (.ps) (2pages) that consistently
> >fails
> >the document is produced using htmldoc 1.8.24 (html->ps)
> >
> >ModemSoftRTFCC is not set in config.ttyS0 so the default (yes?) is in use
> >
> >Sending 3 pages(incl. coverpage)
> >
> >Using sendfax -2 actually transmit all pages ok but the coverpage fails
> >
> >Without using -2
> >Faxing the same document  3 times gave a different result
> >Coverpage ok every time
> >Either 1st or 2nd page got cut 1/5 to 1/2 down the page
> >
> >c00000xxx all report successful transmission
> >
> >What next?
> >
> >Many thanks
> >Pete
> >
> >
>
>
> ____________________ HylaFAX(tm) Users Mailing List
_______________________
>   To subscribe/unsubscribe, click
http://lists.hylafax.org/cgi-bin/lsg2.cgi
>  On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx <
/dev/null
>   *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
>
>
>


-- 
----------------------------------------
I am using the free version of SPAMfighter for private users.
It has removed 1321 spam emails to date.
Paying users do not have this message in their emails.
Try www.SPAMfighter.com for free now!

Attachment: c000000008
Description: Binary data

Attachment: c000000011
Description: Binary data

Attachment: c000000012
Description: Binary data




Project hosted by iFAX Solutions