HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] ttyS0 and ttyS1 devices



Pietro Melideo wrote:

Now I've attached on port com2 (ttyS1) a second modem, and the goal is to use both modems for outgoing and incoming faxes.

In other word I would use these two channels on a FIFO basis in both directions.

Does Hylafax select automatically the less busy device or is there some config file to modify?


As for outbound faxes...

From http://hylafax.sourceforge.net/man/hylafax-config.php:

*ModemPriority*
   The scheduling priority to use for a modem. Priority values are in
   the range 0 to 255 with lesser values signifying higher (more
   desirable) priority. The /Hyla//FAX/ scheduler process assigns the
   highest priority modem that is ready for use when scheduling an
   outbound job.

   If multiple available modems in a job's selected *ModemGroup * have
   the same *ModemPriority* value, then the /Hyla//FAX/ scheduler
   assigns jobs to them in a round-robin fashion.


As for incoming faxes, the modem that is used in that will be determined by the provider of the lines that are connected to those modems... so generally your telephone company or PBX. Usually they can let you choose how calls are allocated to those lines.


Lee.


____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*




Project hosted by iFAX Solutions