Re: [hylafax-users] Issue with HylaFAX and Eicon DIVA Server BRI card

[Chris Parsons <chrisp@xxxxxxxxxxxxxx>]

You will need to set the DID number... The following needs to be part of the
initilization string:

AT&E81231234

obviously replace 81231234 with your did number. The eicon card wont 'find'
a carrier unless the DID number is set.




Regards,



Chris Parsons
InfoTec Communications



-----Original Message-----
From: hylafax-users-bounce@xxxxxxxxxxx
[mailto:hylafax-users-bounce@xxxxxxxxxxx]On Behalf Of Thanos A.
Sent: Thursday, 16 March 2006 5:27 PM
To: hylafax-users@xxxxxxxxxxx
Subject: [hylafax-users] Issue with HylaFAX and Eicon DIVA Server BRI
card


Hello,

I have HylaFAX 4.2.5 running on Linux 2.4.21-37.0.1.EL (CentOS 3.6) with
a Eicon Diva Server BRI card using latest divas4linux_EICON-106.577-1
drivers.

I'm always getting the following error when submitting fax jobs:

[...]
Mar 15 14:25:46.13: [ 7378]: STATE CHANGE: RUNNING -> SENDING
Mar 15 14:25:46.13: [ 7378]: <-- [10:AT+FBOR=0\r]
Mar 15 14:25:46.13: [ 7378]: --> [2:OK]
Mar 15 14:25:46.13: [ 7378]: <-- [13:AT+FPHCTO=30\r]
Mar 15 14:25:46.13: [ 7378]: --> [5:ERROR]
Mar 15 14:25:46.13: [ 7378]: MODEM Command error
Mar 15 14:25:46.13: [ 7378]: <-- [10:AT+FBUG=1\r]
Mar 15 14:25:46.13: [ 7378]: --> [2:OK]
Mar 15 14:25:46.13: [ 7378]: <-- [24:AT+FDCC=7,D,2,2,0,2,0,0\r]
Mar 15 14:25:46.13: [ 7378]: --> [2:OK]
Mar 15 14:25:46.14: [ 7378]: <-- [24:AT+FDIS=1,D,0,2,0,1,0,0\r]
Mar 15 14:25:46.14: [ 7378]: --> [2:OK]
Mar 15 14:25:46.14: [ 7378]: DIAL 0,0295186408
Mar 15 14:25:46.14: [ 7378]: <-- [17:ATDT0,0295186408\r]
Mar 15 14:26:29.16: [ 7378]: --> [10:NO CARRIER]
Mar 15 14:26:29.17: [ 7378]: SEND FAILED: JOB 206 DEST 0295186408 ERR No
carrier detected
Mar 15 14:26:29.17: [ 7378]: <-- [5:ATH0\r]
Mar 15 14:26:29.17: [ 7378]: --> [2:OK]
Mar 15 14:26:29.17: [ 7378]: MODEM set DTR OFF
Mar 15 14:26:29.17: [ 7378]: STATE CHANGE: SENDING -> MODEMWAIT (timeout 5)
Mar 15 14:26:29.17: [ 7378]: SESSION END

Please note that it returns "No carrier detected", but when I send the
fax with a fax machine the carrier is always detected so I think this
problem is related to HylaFAX configuration/Diva drivers.

Can you please advice on how to fix this issue ?

Besides, what's that MODEM Command error about ?

Regards,
A.

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*