Re: [hylafax-users] Issue with HylaFAX and Eicon DIVA Server BRI card

["Thanos A." <thanos.a@xxxxxxxxxxxxx>]

> You will need to set the DID number... The following needs to be part of the
> initilization string:
> AT&E81231234

I tried adding &E<did> to ModemResetCmds however I'm getting modem
wedged error.

This is my modem configuration from the config file:

ModemType:              Class2
ModemRate:              57600   # on boards supporting V.34-fax,
                                # this may need to be 57600
ModemFlowControl:       rtscts
ModemNoFlowCmd:         AT&K0
ModemSoftFlowCmd:       AT&K4
ModemHardFlowCmd:       AT&K3
ModemResetCmds:         AT#CID=14

Class2UseHex:           yes

Class2APQueryCmd:       none
Class2SPLCmd:           none
Class2TBCCmd:           none
Class2ECMType:          2.0     # follows Class 2.0 spec, not Class 2
Class2DDISCmd:          AT+FDIS

RingExtended:           "RING "
CIDNumber:              "CID: "
CIDName:                "DAD: "

Any advice ?

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*