HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

[hylafax-users] Time Zone problem




Hi all,

I'm a newbie using Hylafax and I'm trying to set up a Hylafax server for incoming faxes only. Here is my current config:
* Hylafax 4.2.5 Release 1fc4
* Fedora Core 4
* Ext. modem (3Com U.S. Robotics 56K Faxmodem)

I could get the machine up and running, and receiving faxes with no problems; however, the times of the faxes reported by "faxstat -r" were shown in GMT times;
I tried with "faxstat -rl" and strangely, only the 1st fax received had the right time shown (I've customized the "RcvFmt"):

>faxstat -r
    Date       Time         Sender/TSI  Pages   Filename
2006:02:15 08:16:45     +852 2511 1966      2   fax000000002.tif
2006:02:15 09:18:55     +852 2511 1966      1   fax000000006.tif
2006:02:16 03:17:51     +852 2511 1966      1   fax000000009.tif
2006:02:16 03:11:55     +852 2511 1966      1   fax000000008.tif
2006:02:15 08:19:45     +852 2511 1966      1   fax000000003.tif
2006:02:16 03:06:13     +852 2511 1966      1   fax000000007.tif
2006:02:15 08:28:22     +852 2511 1966      3   fax000000004.tif
2006:02:15 08:38:00     +852 2511 1966      3   fax000000005.tif
2006:02:15 08:03:34     +852 2511 1966      2   fax000000001.tif


>faxstat -rl
    Date       Time         Sender/TSI  Pages   Filename
2006:02:15 16:16:45     +852 2511 1966      2   fax000000002.tif
2006:02:15 09:18:55     +852 2511 1966      1   fax000000006.tif
2006:02:16 03:17:51     +852 2511 1966      1   fax000000009.tif
2006:02:16 03:11:55     +852 2511 1966      1   fax000000008.tif
2006:02:15 08:19:45     +852 2511 1966      1   fax000000003.tif
2006:02:16 03:06:13     +852 2511 1966      1   fax000000007.tif
2006:02:15 08:28:22     +852 2511 1966      3   fax000000004.tif
2006:02:15 08:38:00     +852 2511 1966      3   fax000000005.tif
2006:02:15 08:03:34     +852 2511 1966      2   fax000000001.tif


I have tried putting the "TimeZone: local" setting in "hfaxd.conf", "hyla.conf" but no difference.
My timezone is Hong Kong (GMT+8).

Please help! Thank you very much!

Regards,
Raymond.

====================================================================================================================================
DISCLAIMER :-

"You are reminded that all information hereby supplied by the Government shall be used solely for the designated purpose.  You are obliged to treat the information as confidential and shall not divulge any information to any person except to your own employees and then only to those employees on a need to know basis.  You shall ensure that your employees are aware of and comply with this requirement.  Besides, you shall be responsible for any loss or damage to the data, programs, media or related items released by the Government as well as any loss or damage to the Government arising from the divulgence of information by your employees.  You shall return the supplied information to the Government after use wherever possible, or otherwise, ensure that it is properly destroyed.

This message is for the designated recipient only and may contain privileged, proprietary, or otherwise private information.  If you have received it in error, please notify the sender immediately and delete the original.  Any other use of the email by you is prohibited."
====================================================================================================================================



Project hosted by iFAX Solutions