HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

[hylafax-users] Time Zone problem



Hi all,

I'm a newbie using Hylafax and I'm trying to set up a Hylafax server for 
incoming faxes only. Here is my current config:
* Hylafax 4.2.5 Release 1fc4
* Fedora Core 4
* Ext. modem (3Com U.S. Robotics 56K Faxmodem)

I could get the machine up and running, and receiving faxes with no 
problems; however, the times of the faxes reported by "faxstat -r" were 
shown in GMT times;
I tried with "faxstat -rl" and strangely, only the 1st fax received had 
the right time shown (I've customized the "RcvFmt"):

>faxstat -r
    Date       Time         Sender/TSI  Pages   Filename
2006:02:15 08:16:45     +852 2511 1966      2   fax000000002.tif
2006:02:15 09:18:55     +852 2511 1966      1   fax000000006.tif
2006:02:16 03:17:51     +852 2511 1966      1   fax000000009.tif
2006:02:16 03:11:55     +852 2511 1966      1   fax000000008.tif
2006:02:15 08:19:45     +852 2511 1966      1   fax000000003.tif
2006:02:16 03:06:13     +852 2511 1966      1   fax000000007.tif
2006:02:15 08:28:22     +852 2511 1966      3   fax000000004.tif
2006:02:15 08:38:00     +852 2511 1966      3   fax000000005.tif
2006:02:15 08:03:34     +852 2511 1966      2   fax000000001.tif


>faxstat -rl
    Date       Time         Sender/TSI  Pages   Filename
2006:02:15 16:16:45     +852 2511 1966      2   fax000000002.tif
2006:02:15 09:18:55     +852 2511 1966      1   fax000000006.tif
2006:02:16 03:17:51     +852 2511 1966      1   fax000000009.tif
2006:02:16 03:11:55     +852 2511 1966      1   fax000000008.tif
2006:02:15 08:19:45     +852 2511 1966      1   fax000000003.tif
2006:02:16 03:06:13     +852 2511 1966      1   fax000000007.tif
2006:02:15 08:28:22     +852 2511 1966      3   fax000000004.tif
2006:02:15 08:38:00     +852 2511 1966      3   fax000000005.tif
2006:02:15 08:03:34     +852 2511 1966      2   fax000000001.tif


I have tried putting the "TimeZone: local" setting in "hfaxd.conf", 
"hyla.conf" but no difference.
My timezone is Hong Kong (GMT+8).

Please help! Thank you very much!

Regards,
Raymond.

====================================================================================================================================
DISCLAIMER :-

"You are reminded that all information hereby supplied by the Government 
shall be used solely for the designated purpose.  You are obliged to treat 

the information as confidential and shall not divulge any information to 
any person except to your own employees and then only to those employees 
on a need to know basis.  You shall ensure that your employees are aware 
of and comply with this requirement.  Besides, you shall be responsible 
for any loss or damage to the data, programs, media or related items 
released by the Government as well as any loss or damage to the Government 

arising from the divulgence of information by your employees.  You shall 
return the supplied information to the Government after use wherever 
possible, or otherwise, ensure that it is properly destroyed.

This message is for the designated recipient only and may contain 
privileged, proprietary, or otherwise private information.  If you have 
received it in error, please notify the sender immediately and delete the 
original.  Any other use of the email by you is prohibited."
====================================================================================================================================

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*




Project hosted by iFAX Solutions