Re: [hylafax-users] Unable to send page.

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

Tadeusz Andrzej Kadłubowski wrote:

> Hello,
>
> I got a following session log. Both ends are HylaFAX 4.1.x.
>
> What can be the cause of the timeouts? As usually, I will be very thankfull for
> your help.
>  

lut 09 10:50:36.42: [13365]: <-- [9:AT+FRH=3\r]
lut 09 10:50:36.95: [13365]: --> [7:CONNECT]
lut 09 10:50:37.86: [13365]: --> HDLC<5:FF C8 21 57 BE>
lut 09 10:50:37.86: [13365]: --> [2:OK]
lut 09 10:50:37.86: [13365]: TRAINING succeeded
lut 09 10:50:37.86: [13365]: DELAY 75 ms
lut 09 10:50:37.94: [13365]: <-- [11:AT+FTM=146\r]
lut 09 10:50:37.98: [13365]: --> [7:CONNECT]
lut 09 10:50:37.98: [13365]: SEND begin page
lut 09 10:50:48.21: [13365]: SENT 22406 bytes of data
lut 09 10:50:48.21: [13365]: SEND 2D RTC
lut 09 10:50:48.21: [13365]: SEND end page
lut 09 10:50:50.81: [13365]: --> [2:OK]


There have been so many improvements in Class 1 since 4.1.x that I'd 
dare not use it any more. In new code there is an AT+FRS instead of that 
"DELAY 75 ms", and that could be it.

Lee.


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*