[hylafax-users] Unable to send page.

[Tadeusz Andrzej Kadłubowski <tkadlubo@xxxxxxxxxxxxxxxxx>]

Hello,

I got a following session log. Both ends are HylaFAX 4.1.x.

What can be the cause of the timeouts? As usually, I will be very thankfull for
your help.
-- 
tadeusz

<SNIP>
lut 09 10:50:16.32: [13365]: STATE CHANGE: RUNNING -> SENDING
lut 09 10:50:16.32: [13365]: MODEM input buffering enabled
lut 09 10:50:16.32: [13365]: <-- [12:AT+FCLASS=1\r]
lut 09 10:50:16.44: [13365]: --> [2:OK]
lut 09 10:50:16.44: [13365]: DIAL 0586638093
lut 09 10:50:16.44: [13365]: <-- [15:ATDT0586638093\r]
lut 09 10:50:29.04: [13365]: --> [7:CONNECT]
lut 09 10:50:29.04: [13365]: MODEM input buffering disabled
lut 09 10:50:30.39: [13365]: --> HDLC<25:FF C0 02 16 C6 A6 2E 4E A6 76 2E 4E 86
0A 04 04 04 04 04 04 04 04 04 80 74>
lut 09 10:50:30.40: [13365]: --> [2:OK]
lut 09 10:50:30.40: [13365]: REMOTE CSI "Partnertech"
lut 09 10:50:30.40: [13365]: <-- [9:AT+FRH=3\r]
lut 09 10:50:30.42: [13365]: --> [7:CONNECT]
lut 09 10:50:30.87: [13365]: --> HDLC<12:FF C8 01 00 77 5F 01 79 03 C0 BC A1>
lut 09 10:50:30.88: [13365]: --> [2:OK]
lut 09 10:50:30.88: [13365]: REMOTE best rate 14400 bit/s
lut 09 10:50:30.88: [13365]: REMOTE max page width 2432 pixels in 303 mm
lut 09 10:50:30.88: [13365]: REMOTE max unlimited page length
lut 09 10:50:30.88: [13365]: REMOTE best vres 7.7 line/mm
lut 09 10:50:30.88: [13365]: REMOTE best format 2-D MR
lut 09 10:50:30.88: [13365]: REMOTE best 0 ms/scanline
lut 09 10:50:30.88: [13365]: USE 14400 bit/s
lut 09 10:50:30.88: [13365]: USE 0 ms/scanline
lut 09 10:50:30.88: [13365]: SEND file "docq/doc39.ps;40"
lut 09 10:50:30.89: [13365]: USE page width 1728 pixels in 215 mm
lut 09 10:50:30.89: [13365]: USE unlimited page length
lut 09 10:50:30.89: [13365]: USE 3.85 line/mm
lut 09 10:50:30.89: [13365]: USE 2-D MR
lut 09 10:50:30.89: [13365]: SEND training at v.17 14400 bit/s
lut 09 10:50:30.89: [13365]: <-- [9:AT+FTH=3\r]
lut 09 10:50:30.94: [13365]: --> [7:CONNECT]
lut 09 10:50:30.94: [13365]: <-- HDLC<23:FF C0 C2 E6 F6 36 F6 76 16 C6 A6 2A 04
CE A6 C6 C6 82 04 9E CE 86 A2>
lut 09 10:50:32.73: [13365]: --> [7:CONNECT]
lut 09 10:50:32.73: [13365]: <-- HDLC<6:FF C8 C1 00 45 1E>
lut 09 10:50:33.17: [13365]: --> [2:OK]
lut 09 10:50:33.17: [13365]: <-- [9:AT+FTS=7\r]
lut 09 10:50:33.27: [13365]: --> [2:OK]
lut 09 10:50:33.27: [13365]: <-- [11:AT+FTM=145\r]
lut 09 10:50:33.31: [13365]: --> [7:CONNECT]
lut 09 10:50:36.42: [13365]: --> [2:OK]
lut 09 10:50:36.42: [13365]: <-- [9:AT+FRH=3\r]
lut 09 10:50:36.95: [13365]: --> [7:CONNECT]
lut 09 10:50:37.86: [13365]: --> HDLC<5:FF C8 21 57 BE>
lut 09 10:50:37.86: [13365]: --> [2:OK]
lut 09 10:50:37.86: [13365]: TRAINING succeeded
lut 09 10:50:37.86: [13365]: DELAY 75 ms
lut 09 10:50:37.94: [13365]: <-- [11:AT+FTM=146\r]
lut 09 10:50:37.98: [13365]: --> [7:CONNECT]
lut 09 10:50:37.98: [13365]: SEND begin page
lut 09 10:50:48.21: [13365]: SENT 22406 bytes of data
lut 09 10:50:48.21: [13365]: SEND 2D RTC
lut 09 10:50:48.21: [13365]: SEND end page
lut 09 10:50:50.81: [13365]: --> [2:OK]
lut 09 10:50:50.81: [13365]: <-- [9:AT+FTS=7\r]
lut 09 10:50:50.91: [13365]: --> [2:OK]
lut 09 10:50:50.91: [13365]: SEND send MPS (more pages, same document)
lut 09 10:50:50.91: [13365]: <-- [9:AT+FTH=3\r]
lut 09 10:50:50.96: [13365]: --> [7:CONNECT]
lut 09 10:50:50.96: [13365]: <-- HDLC<3:FF C8 F2>
lut 09 10:50:52.28: [13365]: --> [2:OK]
lut 09 10:50:52.28: [13365]: <-- [9:AT+FRH=3\r]
lut 09 10:50:55.38: [13365]: --> [0:]
lut 09 10:50:55.38: [13365]: MODEM <Empty line>
lut 09 10:50:55.38: [13365]: MODEM TIMEOUT: waiting for v.21 carrier
lut 09 10:50:55.44: [13365]: --> [2:OK]
lut 09 10:50:55.44: [13365]: SEND send MPS (more pages, same document)
lut 09 10:50:55.44: [13365]: <-- [9:AT+FTH=3\r]
lut 09 10:50:55.49: [13365]: --> [7:CONNECT]
lut 09 10:50:55.49: [13365]: <-- HDLC<3:FF C8 F2>
lut 09 10:50:56.81: [13365]: --> [2:OK]
lut 09 10:50:56.81: [13365]: <-- [9:AT+FRH=3\r]
lut 09 10:50:59.91: [13365]: --> [0:]
lut 09 10:50:59.91: [13365]: MODEM <Empty line>
lut 09 10:50:59.91: [13365]: MODEM TIMEOUT: waiting for v.21 carrier
lut 09 10:50:59.97: [13365]: --> [2:OK]
lut 09 10:50:59.97: [13365]: SEND send MPS (more pages, same document)
lut 09 10:50:59.97: [13365]: <-- [9:AT+FTH=3\r]
lut 09 10:51:00.02: [13365]: --> [7:CONNECT]
lut 09 10:51:00.02: [13365]: <-- HDLC<3:FF C8 F2>
lut 09 10:51:01.34: [13365]: --> [2:OK]
lut 09 10:51:01.34: [13365]: <-- [9:AT+FRH=3\r]
lut 09 10:51:04.44: [13365]: --> [0:]
lut 09 10:51:04.44: [13365]: MODEM <Empty line>
lut 09 10:51:04.44: [13365]: MODEM TIMEOUT: waiting for v.21 carrier
lut 09 10:51:04.50: [13365]: --> [2:OK]
lut 09 10:51:04.50: [13365]: No response to MPS or EOP repeated 3 tries
lut 09 10:51:04.50: [13365]: <-- [9:AT+FTH=3\r]
lut 09 10:51:04.55: [13365]: --> [7:CONNECT]
lut 09 10:51:04.55: [13365]: <-- HDLC<3:FF C8 DF>
lut 09 10:51:05.87: [13365]: --> [2:OK]
lut 09 10:51:05.87: [13365]: MODEM input buffering enabled
lut 09 10:51:05.87: [13365]: SEND FAILED: JOB 39 DEST 0586638093 ERR No
response to MPS or EOP repeated 3 tries; too many attempts to send
lut 09 10:51:05.87: [13365]: <-- [5:ATH0\r]
lut 09 10:51:07.81: [13365]: --> [2:OK]
lut 09 10:51:07.81: [13365]: MODEM set DTR OFF
lut 09 10:51:07.81: [13365]: STATE CHANGE: SENDING -> MODEMWAIT (timeout 5)
lut 09 10:51:07.81: [13365]: SESSION END



____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*