Re: [hylafax-users] T.30 T2 timeout, expected signal not received

["Manuele" <manuele@xxxxxxxxxx>]

This is one of my logs (only shows the end):

ott 28 12:09:31.39: [25431]: --> [2:OK]
ott 28 12:09:31.39: [25431]: RECV recv PPS (partial page signal)
ott 28 12:09:31.39: [25431]: RECV recv MPS (more pages, same document)
ott 28 12:09:31.39: [25431]: RECV received 13 frames of block 1 of page 13
ott 28 12:09:31.40: [25431]: RECV: 3289 bytes of data, 1109 total lines
ott 28 12:09:31.40: [25431]: <-- [9:AT+FRS=7\r]
ott 28 12:09:31.50: [25431]: --> [2:OK]
ott 28 12:09:31.51: [25431]: <-- [9:AT+FTH=3\r]
ott 28 12:10:01.50: [25431]: MODEM <Timeout>
ott 28 12:10:01.50: [25431]: RECV FAX: Failure to raise V.21 transmission 
carrier.
ott 28 12:10:01.51: [25431]: <-- [9:AT+FTH=3\r]
ott 28 12:10:01.51: [25431]: RECV FAX (000000025): recvq/fax000000024.tif 
from <UNSPECIFIED>, route to <unspecified>, 12 pages in 3:06
ott 28 12:10:01.64: [25431]: --> [8:AT+FTH=3]
ott 28 12:10:01.64: [25431]: RECV FAX (000000025): session with 
<UNSPECIFIED> terminated abnormally: Failure to raise V.21 transmission 
carrier.
ott 28 12:10:01.64: [25431]: RECV FAX: bin/faxrcvd "recvq/fax000000024.tif" 
"ttyS0" "000000025" "Failure to raise V.21 transmission carrier."
ott 28 12:10:01.65: [25431]: RECV FAX: end
ott 28 12:10:01.65: [25431]: SESSION END

The message "Failure to raise V.21 transmission carrier." came with the new 
version of hylafax (as you suggest to install).
I have an US Robotics Modem/FAX 56K External.

thanks for your help
Manuele

----- Original Message ----- 
From: "Lee Howard" <faxguy@xxxxxxxxxxxxxxxx>
To: "Manuele" <manuele@xxxxxxxxxx>
Cc: <hylafax-users@xxxxxxxxxxx>
Sent: Friday, October 28, 2005 5:12 PM
Subject: Re: [hylafax-users] T.30 T2 timeout, expected signal not received


> Manuele wrote:
>
> > I have upgraded hylafax to version 4.2.2, but the problem still remain.
> > What can I do? Can I disable completely the error check, as I wrote 
> > before?
>
>
> Please send the entire session log with 4.2.2.
>
> No, you cannot disable FCS checking.
>
> Lee.
>
> ____________________ HylaFAX(tm) Users Mailing List 
> _______________________
>  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
> On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
>  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*