[hylafax-users] Fixed --- Re: 4.2.2 & Mainpine not working

[Tom Miller <tom@xxxxxxxxxxxxxx>]

Thank you to all.

I have the startup script for the setserial on two different 
places.   

Thanks,

Tom

---- Original message ----
>Date: Thu, 13 Oct 2005 22:23:04 -0400
>From: Tom Miller <tom@xxxxxxxxxxxxxx>  
>Subject: Re: [hylafax-users] 4.2.2 & Mainpine not working  
>To: support@xxxxxxxxxxxx, hylafax-users@xxxxxxxxxxx
>
>I found the problem but do not know how to resovle it yet.
>
>I have this these parameter in the /etc/sysctl.conf file.
>For some reason it only can set two port at the reboot.
>
>setserial /dev/ttyS4 port 0xAC80 irq 16 autoconfig ^fourport
>setserial /dev/ttyS5 port 0xAC88 irq 16 autoconfig ^fourport
>setserial /dev/ttyS6 port 0xAC90 irq 16 autoconfig ^fourport
>setserial /dev/ttyS7 port 0xAC98 irq 16 autoconfig ^fourport
>setserial /dev/ttyS8 port 0xACA0 irq 16 autoconfig ^fourport
>setserial /dev/ttyS9 port 0xACA8 irq 16 autoconfig ^fourport
>setserial /dev/ttyS10 port 0xACB0 irq 16 autoconfig ^fourport
>setserial /dev/ttyS11 port 0xACB8 irq 16 autoconfig ^fourport
>setserial /dev/ttyS4 set_multiport port1 0xACE0 mask1 0xFF 
>match1 0x00
>
>
>After I set them to the above values and run fadaddmodem.
>This is what I got.  
>
>[root@gabrielle software]# faxaddmodem
>Serial port that modem is connected to []? ttyS5
>Sorry, the device is currently in use by another program.
>
>
>How do I disable and reserve the address and IRQ for this 
>modem?
>
>
>
>
>
>
>
>---- Original message ----
>>Date: Thu, 13 Oct 2005 21:09:32 -0400
>>From: Tom Miller <tom@xxxxxxxxxxxxxx>  
>>Subject: 4.2.2 & Mainpine not working  
>>To: support@xxxxxxxxxxxx, hylafax-users@xxxxxxxxxxx
>>
>>guys,
>>
>>I am having problem with running either faxsetup or 
>>faxaddmodem for more than two port.   I have a Oct+ 
>>8 port MainPine.  It only allow me to do a complete set
>>up and detecting for only two ports  (port ttyS4 and ttyS11)
>>I am running hylafax 4.2.2 and RedHat ES 3.0.   Please see 
>>the complain at the end of this email:  Unable to deduce 
DTE-
>>DCE speed;   Any sugguestion?
>>
>>
>>CountryCode:            1
>>AreaCode:               587
>>FAXNumber:              +1.567.777.7777
>>LongDistancePrefix:     1
>>InternationalPrefix:    011
>>DialStringRules:        etc/dialrules
>>SessionTracing:         11
>>RingsBeforeAnswer:      1
>>SpeakerVolume:          high
>>GettyArgs:              "-h %l dx_%s"
>>LocalIdentifier:        "NothingSetup"
>>TagLineFont:            etc/lutRS18.pcf
>>TagLineFormat:          "From %%l|%c|Page %%P of %%T"
>>MaxRecvPages:           25
>>
>>Are these ok [yes]?
>>
>>Now we are going to probe the tty port to figure out the 
type
>>of modem that is attached.  This takes a few seconds, so be 
>>patient.
>>Note that if you do not have the modem cabled to the port, 
>or 
>>the
>>modem is turned off, this may hang (just go and cable up 
the 
>>modem
>>or turn it on, or whatever).
>>
>>Probing for best speed to talk to modem:
>>Unable to deduce DTE-DCE speed; check that you are using the
>>correct device and/or that your modem is setup properly.  If
>>all else fails, try the -s option to lock the speed.
>>
>>
>>---- Original message ----
>>>Date: Thu, 13 Oct 2005 11:36:07 -0400
>>>From: Tom Miller <tom@xxxxxxxxxxxxxx>  
>>>Subject: 4.2.2 & Mainpine not working  
>>>To: support@xxxxxxxxxxxx, hylafax-users@xxxxxxxxxxx
>>>
>>>Does anyone have the same problem with version 4.2.2 and
>>>Mainpine modem?
>>>
>>>I reinstall Hylafax 4.2.2 and went through the same 
faxsetup
>>>as before for version 4.2.1 except one thing I used class =
>>>1.0 instead of 1.  The hylafax and modem doesn't pickup and
>>>accept any incoming fax at all.  I have 8 port MainPine 
>>Oct+ .
>>> However, after ran the faxsetup modem only port ttyS4 and
>>>ttyS11 were created the rest was not and have the 
following 
>>error:
>>>
>>>Probing for best speed to talk to modem:
>>>Unable to deduce DTE-DCE speed; check that you are using 
the
>>>correct device and/or that your modem is setup properly.  
If
>>>all else fails, try the -s option to lock the speed.
>>>
>>>What happen to faxstat?  It is different in 4.2.2
>>>How to get faxstat or HylaFax to show status of all ttySx
>>>
>>>Tom
>>>
>>>
>>>
>>>
>>>---- Original message ----
>>>>Date: Thu, 13 Oct 2005 10:33:49 +0100
>>>>From: "support" <support@xxxxxxxxxxxx>  
>>>>Subject: RE: regarding Q&A # 48  
>>>>To: <tom@xxxxxxxxxxxxxx>
>>>>
>>>>Hi Tom.
>>>>
>>>>I don't have answers to your specific questions but will
>>>discuss with our
>>>>engineers and come back to you.  While you are waiting I
>>>would suggest that
>>>>you post your questions to the HylaFAX users list because 
>we
>>>have a lot of
>>>>customers who monitor this and may have solved your 
>problem.
>>>>
>>>>Regards
>>>>
>>>>Mainpine Support
>>>>USA +1 718 701 2422 | Asia/Europe +44 1225 436137 
>>>>support@xxxxxxxxxxxx | www.mainpine.com 
>>>>
>>>>-----Original Message-----
>>>>From: Tom Miller [mailto:tom@xxxxxxxxxxxxxx] 
>>>>Sent: 13 October 2005 06:46
>>>>To: support@xxxxxxxxxxxx
>>>>Subject: regarding Q&A # 48
>>>>
>>>>
>>>>Every time I mannually touched or modified the
>>>>/var/spool/hylafax/etc/config.ttyS4 the whole modem won't
>>>work any more.  I
>>>>manually modified those ttySX three time.
>>>>two time required a reboot from the server. The third 
time 
>>it
>>>still not
>>>>working until now.  I am re-installing with the new 
version
>>>of hylafax 4.2.2
>>>>instead of 4.2.1.  Hope, it will fix it by installing
>>>everything again.  Any
>>>>thought?
>>>>
>>>>Thanks,
>>>>Tom
>>>>
>>>>
>>>>---- Original message ----
>>>>>Date: Tue, 13 Sep 2005 10:11:20 +0100
>>>>>From: "support" <support@xxxxxxxxxxxx>
>>>>>Subject: RE: [hylafax-users] Incoming fax doesn't work
>>>>>To: <tom@xxxxxxxxxxxxxx>
>>>>>
>>>>>Hi Tom.
>>>>>
>>>>>Class 1 and 1.0 are significantly more robust when used 
>>with
>>>>HylaFAX.
>>>>>
>>>>>Regards
>>>>>
>>>>>Support
>>>>>Mainpine Ltd.
>>>>>e: support@xxxxxxxxxxxx
>>>>>w: http://www.mainpine.com
>>>>>t: +44(0) 1373 830888
>>>>>f: +44(0) 1373 830768
>>>>>
>>>>>-----Original Message-----
>>>>>From: Tom Miller [mailto:tom@xxxxxxxxxxxxxx]
>>>>>Sent: 13 September 2005 08:14
>>>>>To: support@xxxxxxxxxxxx
>>>>>Subject: Re: [hylafax-users] Incoming fax doesn't work
>>>>>
>>>>>Thank you.
>>>>>So Hylafax Class 1 driver is recommended for MainPine 
>>board?
>>>>>
>>>>>Thanks much,
>>>>>Tom
>>>>>
>>>>>---- Original message ----
>>>>>>Date: Sun, 4 Sep 2005 12:10:54 +0100
>>>>>>From: "support" <support@xxxxxxxxxxxx>
>>>>>>Subject: Re: [hylafax-users] Incoming fax doesn't work
>>>>>>To: <tom@xxxxxxxxxxxxxx>, <hylafax-users@xxxxxxxxxxx>
>>>>>>
>>>>>>Hi Tom.
>>>>>>
>>>>>>Our support faq has answers to common HylaFAX questions
>>>>>(answers # 47 to
>>>>>>55), please take a look and let us know what's questions
>>>>>remain;
>>>>>>
>>>>>>http://www.mainpine.com/q_a.php
>>>>>>
>>>>>>I would also suggest that you upgrade to the latest 
>>HylaFAX
>>>>>release
>>>>>>(4.2.2rc5) because of the work undertaken in the Class 1
>>>>>driver.
>>>>>>
>>>>>>Regards
>>>>>>
>>>>>>Support
>>>>>>Mainpine Ltd.
>>>>>>e: support@xxxxxxxxxxxx
>>>>>>w: http://www.mainpine.com
>>>>>>t: +44(0) 1373 830888
>>>>>>f: +44(0) 1373 830768
>>>>>>
>>>>>>-----Original Message-----
>>>>>>From: Tom Miller [mailto:tom@xxxxxxxxxxxxxx]
>>>>>>Sent: 04 September 2005 11:24
>>>>>>To: support@xxxxxxxxxxxx; hylafax-users@xxxxxxxxxxx
>>>>>>Subject: Incoming fax doesn't work
>>>>>>
>>>>>>
>>>>>>I have the following systems:
>>>>>>OS:  RedHat ES 3.0
>>>>>>Hylafax:  4.2.1
>>>>>>Modem:    8 Port MainPine
>>>>>>
>>>>>>
>>>>>>I can send out fax but I can not receive any incoming 
>fax.
>>>>>>There are  not thing in the /var/spool/hylafax/recvq The
>>>>>modem does not seem
>>>>>>to pick up any incoming fax at all.
>>>>>>
>>>>>>
>>>>>>What am I missing here?
>>>>>>What do I need to verify?
>>>>>>
>>>>>>How can I temporary turn off the other 7 port
>>>>>>(ttyS5,ttyS6,ttyS7,ttyS8,ttyS9,ttyS10,ttyS11)
>>>>>>and just use the ttyS4 for testing/verfying incoming 
fax?
>>>>>>
>>>>>>In other world, can I force HylaFax to answer incoming 
>>only
>>>>>on ttyS4?  if
>>>>>>yes, How
>>>>>>
>>>>>>
>>>>>>Thanks much.
>>>>>>
>>>>>>Tom
>>>>>>
>>>>>>
>>>>>>
>>>>>>____________________ HylaFAX(tm) Users Mailing List
>>>>>_______________________
>>>>>>  To subscribe/unsubscribe, click
>>>>>http://lists.hylafax.org/cgi-bin/lsg2.cgi
>>>>>> On UNIX: mail -s unsubscribe hylafax-users-
>>>>>request@xxxxxxxxxxx < /dev/null
>>>>>>  *To learn about commercial HylaFAX(tm) support, mail
>>>>>sales@xxxxxxxxx*
>>>>>>
>>>>>
>>>>>
>>>>
>>>>
>
>____________________ HylaFAX(tm) Users Mailing List 
_______________________
>  To subscribe/unsubscribe, click 
http://lists.hylafax.org/cgi-bin/lsg2.cgi
> On UNIX: mail -s unsubscribe hylafax-users-
request@xxxxxxxxxxx < /dev/null
>  *To learn about commercial HylaFAX(tm) support, mail 
sales@xxxxxxxxx*
>

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*