Re: [hylafax-users] Status of batching?

[rortgiesen@xxxxxxxxxxxxxxxxxxxxxxx]

Thanks for the info Offman,

I think that's an excellent change, one that could be parameterized and
installed as part of the Hyla configuration.  For those of us with large
volumes of small faxes, this would be a great help.  I've asked you to send
the code change in private, if the code can be made more generic, I'll
return it to the group as it would have significant value for us
"batchers".

Ray

ROrtgiesen@xxxxxxxxxxxxxxxxxxxxxxx




                                                                           
             offman                                                        
             <offman@micromark                                             
             .com.cn>                                                   To 
                                       rortgiesen@xxxxxxxxxxxxxxxxxxxxxxx  
             09/23/2005 02:50                                           cc 
             AM                        hylafax-users@xxxxxxxxxxx           
                                                                   Subject 
                                       Re: [hylafax-users] Status of       
                                       batching?                           
                                                                           
                                                                           
                                                                           
                                                                           
                                                                           
                                                                           






to utilize it, you faxes MUST all be set to EXACTLY the same send
time. & same dest, obviously!!.
The way i do it , is to partition each hour into 15 minutes, and
faxes to the same dest get set to that 14/29/44/59 minutes.
doing it that way you do not need to check for overfow past the hour/
day.
then i take the current time and add 2 minutes to it, if it is still
in the Quarter 14/29/44/59 then i process the  pdf2ps, if it is
outside the Quarter, i shove the pdf2ps into the next quater.
I use 15 minutes,  so that no batched fax has to wait for more than
15 minutes before being sent.




On Sep 23, 2005, at 2:51 AM, rortgiesen@xxxxxxxxxxxxxxxxxxxxxxx wrote:

> Hi,
>
> Just checking in on the status of the new batching facility.  I
> "thought"
> it was going in, but don't see many references to it.  So my
> questions are
> (1) If it's in, where do I make the appropriate changes to enable
> it.  (2)
> If it's not in yet, any idea of how the project is coming along?
>
> Thanks for any input & comments
>
> Ray
>
> ROrtgiesen@xxxxxxxxxxxxxxxxxxxxxxx
>
>
>
>
> CONFIDENTIALITY NOTICE: This e-mail, including attachments, is for
> the sole use of the individual to whom it is addressed. This
> message is confidential and may contain information that is
> privileged, confidential and is exempt from disclosure under
> applicable law. Any unauthorized review, use, disclosure or
> distribution is prohibited. If you have received this e-mail in
> error, please notify the sender by reply e-mail and destroy this
> message and its attachments.
>
>
>






CONFIDENTIALITY NOTICE: This e-mail, including attachments, is for the sole use of the individual to whom it is addressed. This message is confidential and may contain information that is privileged, confidential and is exempt from disclosure under applicable law. Any unauthorized review, use, disclosure or distribution is prohibited. If you have received this e-mail in error, please notify the sender by reply e-mail and destroy this message and its attachments.