[hylafax-users] "Protocol error layer 1: Mostly your ISDN cable is not inserted."

[Daniel Siechniewicz <dsiechniewicz@xxxxxxxxxxx>]

Hi

I'm sending a lot of faxes using my AVM C4 ISDN card, hylafax 4.2.1 and
Capi4Hylafax 01.02.02 + 2 ISDN lines, and I get a lot of errors saying:

"Protocol error layer 1: Mostly your ISDN cable is not inserted."

Of course many faxes do get sent, so it's not the cable's fault.

I have noticed that:

egrep '(faxCAPI)(.*)(ISDN\ cable\ is\ not)' /var/spool/hylafax/log/
xferfaxlog |wc -l 

28778

egrep '(faxCAPI3)(.*)(ISDN\ cable\ is\ not)' /var/spool/hylafax/log/
xferfaxlog |wc -l 

4

egrep '(faxCAPI4)(.*)(ISDN\ cable\ is\ not)' /var/spool/hylafax/log/
xferfaxlog |wc -l 

0

I only use 3rd and 4th controller, and logs show, that jobs get
queued to faxCAPI31, faxCAPI32, faxCAPI41, faxCAPI42 (that's fine) and
also to faxCAPI (no numbers). And this faxCAPI returns almost all of
the ISDN errors. There's no such device defined in /var/spool/hylafax/
etc/* (no faxCAPI without numbers), so I start to suspect another bug
in capi4hylafax :). But the guys from AVM support seem to take time
with the answer...

Anybody has an idea how to get rid of these annoying errors?


-- 
Best regards,
Daniel Siechniewicz
Lerkins Group

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*