HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] Force using 2D-MR



I need to force hylafax to use 2D-MR to a destination.
I already set Use2D in the config-file to Yes, but the transmission is still in 1D-MR.

the only difference is that one file is send with 2D-MR the other one with 1D-MR. I use the same hylafax-version with the same modem and the same firmware on the modems just on different servers

Any suggestions ?

Try using the same phone cord and line on both servers.


Could be a line problem, or route through a PBX.

Just a thought....

Best,

PKrash, in sunny STL, US

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*




Project hosted by iFAX Solutions