 HylaFAX The world's
most advanced open source fax server
|
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]
[hylafax-users] EOP between 2 hylafax server with Multitech 5656 modem
- To: <hylafax-users@xxxxxxxxxxx>
- Subject: [hylafax-users] EOP between 2 hylafax server with Multitech 5656 modem
- From: "Emmanuel RIZZI" <erizzi@xxxxxxxxxx>
- Date: Fri, 25 Mar 2005 08:26:47 +0100
Hello
I'm running hylafax 4.2.1 on 2 linux servers with multitech 5656 modems
Session log follow
SENDER:
mar 25 08:06:16.47: [20843]: SESSION BEGIN 000000078 334150384446200
mar 25 08:06:16.47: [20843]: HylaFAX (tm) Version 4.2.1
mar 25 08:06:16.47: [20843]: SEND FAX: JOB 16 DEST 0384444500 COMMID 000000078 DEVICE '/dev/ttyS0'
mar 25 08:06:16.47: [20843]: <-- [10:AT+FTBC=0\r]
mar 25 08:06:16.58: [20843]: --> [2:OK]
mar 25 08:06:16.58: [20843]: <-- [10:AT+FBOR=0\r]
mar 25 08:06:16.70: [20843]: --> [2:OK]
mar 25 08:06:16.70: [20843]: <-- [13:AT+FPHCTO=30\r]
mar 25 08:06:16.82: [20843]: --> [2:OK]
mar 25 08:06:16.82: [20843]: <-- [24:AT+FDCC=1,5,2,2,0,0,0,0\r]
mar 25 08:06:16.95: [20843]: --> [2:OK]
mar 25 08:06:16.96: [20843]: DIAL 0384446200
mar 25 08:06:16.96: [20843]: <-- [17:ATDT0,0384446200\r]
mar 25 08:06:34.90: [20843]: --> [5:+FCON]
mar 25 08:06:36.53: [20843]: --> [29:+FCSI: " SARL"]
mar 25 08:06:36.53: [20843]: REMOTE CSI "SARL"
mar 25 08:06:36.97: [20843]: --> [22:+FDIS: 1,5,2,2,0,0,0,0]
mar 25 08:06:36.97: [20843]: --> [2:OK]
mar 25 08:06:36.97: [20843]: REMOTE best rate 14400 bit/s
mar 25 08:06:36.97: [20843]: REMOTE max A3 page width (303 mm)
mar 25 08:06:36.97: [20843]: REMOTE max unlimited page length
mar 25 08:06:36.97: [20843]: REMOTE best vres 7.7 line/mm
mar 25 08:06:36.97: [20843]: REMOTE best format 1-D MH
mar 25 08:06:36.97: [20843]: REMOTE best 0 ms/scanline
mar 25 08:06:36.97: [20843]: USE 14400 bit/s
mar 25 08:06:36.97: [20843]: USE 0 ms/scanline
mar 25 08:06:36.97: [20843]: SEND file "docq/doc28.ps;30"
mar 25 08:06:36.97: [20843]: USE A4 page width (215 mm)
mar 25 08:06:36.97: [20843]: USE unlimited page length
mar 25 08:06:36.97: [20843]: USE 3.85 line/mm
mar 25 08:06:36.97: [20843]: USE 1-D MH
mar 25 08:06:36.97: [20843]: <-- [24:AT+FDIS=0,5,0,2,0,0,0,0\r]
mar 25 08:06:37.10: [20843]: --> [2:OK]
mar 25 08:06:37.10: [20843]: <-- [7:AT+FDT\r]
mar 25 08:06:44.76: [20843]: --> [22:+FDCS: 0,5,0,2,0,0,0,0]
mar 25 08:06:44.76: [20843]: --> [7:CONNECT]
mar 25 08:06:44.76: [20843]: SEND wait for XON
mar 25 08:06:44.76: [20843]: --> [1:]
mar 25 08:06:44.76: [20843]: SEND begin page
mar 25 08:06:44.76: [20843]: <-- data [1032]
mar 25 08:06:44.76: [20843]: <-- data [124]
mar 25 08:06:44.76: [20843]: SENT 1148 bytes of data
mar 25 08:06:44.76: [20843]: <-- data [2]
mar 25 08:06:45.37: [20843]: SEND end page
mar 25 08:06:45.79: [20843]: --> [2:OK]
mar 25 08:06:45.79: [20843]: SEND send EOP (no more pages or documents)
mar 25 08:06:45.79: [20843]: <-- [9:AT+FET=2\r]
mar 25 08:06:48.84: [20843]: --> [8:+FPTS: 2]
mar 25 08:06:48.84: [20843]: --> [2:OK]
mar 25 08:06:48.84: [20843]: SEND recv RTN (retrain negative)
mar 25 08:06:48.84: [20843]: <-- [24:AT+FDIS=0,4,0,2,0,0,0,0\r]
mar 25 08:06:48.97: [20843]: --> [2:OK]
mar 25 08:06:48.97: [20843]: <-- [7:AT+FDT\r]
mar 25 08:06:56.61: [20843]: --> [22:+FDCS: 0,3,0,2,0,0,0,0]
mar 25 08:06:56.61: [20843]: --> [7:CONNECT]
mar 25 08:06:56.61: [20843]: SEND wait for XON
mar 25 08:06:56.61: [20843]: --> [1:]
mar 25 08:06:56.61: [20843]: SEND begin page
mar 25 08:06:56.61: [20843]: <-- data [1032]
mar 25 08:06:56.61: [20843]: <-- data [124]
mar 25 08:06:56.61: [20843]: SENT 1148 bytes of data
mar 25 08:06:56.61: [20843]: <-- data [2]
mar 25 08:06:57.22: [20843]: SEND end page
mar 25 08:06:57.99: [20843]: --> [2:OK]
mar 25 08:06:57.99: [20843]: SEND send EOP (no more pages or documents)
mar 25 08:06:57.99: [20843]: <-- [9:AT+FET=2\r]
mar 25 08:07:11.68: [20843]: --> [9:+FHNG: 54]
mar 25 08:07:11.68: [20843]: REMOTE HANGUP: No response to EOP repeated 3 times (code 54)
mar 25 08:07:11.68: [20843]: SEND: No response to EOP repeated 3 times; Giving up after 3 attempts to send same page "docq/doc28.ps;30", dirnum 0
mar 25 08:07:11.68: [20843]: <-- [5:ATH0\r]
mar 25 08:07:12.50: [20843]: --> [2:OK]
mar 25 08:07:12.50: [20843]: SESSION END
RECEIVER
Mar 25 08:06:27.79: [ 1150]: SESSION BEGIN 000004299 14150384446200
Mar 25 08:06:27.79: [ 1150]: HylaFAX (tm) Version 4.2.1
Mar 25 08:06:27.79: [ 1150]: <-- [4:ATA\r]
Mar 25 08:06:31.83: [ 1150]: --> [3:FAX]
Mar 25 08:06:37.82: [ 1150]: --> [5:+FCON]
Mar 25 08:06:37.83: [ 1150]: ANSWER: FAX CONNECTION DEVICE '/dev/ttyS0'
Mar 25 08:06:37.83: [ 1150]: RECV FAX: begin
Mar 25 08:06:39.42: [ 1150]: --> [29:+FTSI: " SA"]
Mar 25 08:06:39.43: [ 1150]: REMOTE TSI "SA"
Mar 25 08:06:39.81: [ 1150]: --> [22:+FDCS: 0,5,0,2,0,0,0,0]
Mar 25 08:06:39.82: [ 1150]: REMOTE wants 14400 bit/s
Mar 25 08:06:39.82: [ 1150]: REMOTE wants A4 page width (215 mm)
Mar 25 08:06:39.82: [ 1150]: REMOTE wants unlimited page length
Mar 25 08:06:39.82: [ 1150]: REMOTE wants 3.85 line/mm
Mar 25 08:06:39.82: [ 1150]: REMOTE wants 1-D MH
Mar 25 08:06:39.92: [ 1150]: --> [2:OK]
Mar 25 08:06:39.93: [ 1150]: <-- [7:AT+FDR\r]
Mar 25 08:06:42.87: [ 1150]: --> [5:+FCFR]
Mar 25 08:06:45.17: [ 1150]: --> [22:+FDCS: 0,5,0,2,0,0,0,0]
Mar 25 08:06:45.18: [ 1150]: REMOTE wants 14400 bit/s
Mar 25 08:06:45.18: [ 1150]: REMOTE wants A4 page width (215 mm)
Mar 25 08:06:45.18: [ 1150]: REMOTE wants unlimited page length
Mar 25 08:06:45.18: [ 1150]: REMOTE wants 3.85 line/mm
Mar 25 08:06:45.18: [ 1150]: REMOTE wants 1-D MH
Mar 25 08:06:45.18: [ 1150]: --> [7:CONNECT]
Mar 25 08:06:45.18: [ 1150]: RECV: begin page
Mar 25 08:06:45.18: [ 1150]: RECV: send trigger 022
Mar 25 08:06:45.18: [ 1150]: <-- data [1]
Mar 25 08:06:45.18: [ 1150]: Copy quality checking performed by host
Mar 25 08:06:46.30: [ 1150]: RECV: 105 total lines, 0 bad lines, 0 consecutive bad lines
Mar 25 08:06:46.41: [ 1150]: --> [18:+FPTS: 2,105,105,0]
Mar 25 08:06:47.61: [ 1150]: --> [7:+FET: 2]
Mar 25 08:06:47.62: [ 1150]: RECV recv EOP (no more pages or documents)
Mar 25 08:06:47.72: [ 1150]: --> [2:OK]
Mar 25 08:06:47.73: [ 1150]: RECV send MCF (message confirmation)
Mar 25 08:06:47.73: [ 1150]: <-- [7:AT+FDR\r]
Mar 25 08:06:47.73: [ 1150]: RECV FAX (000004299): from SA, page 1 in 0:08, INF, 3.85 line/mm, 1-D MH, 14400 bit/s
Mar 25 08:06:47.73: [ 1150]: RECV FAX (000004299): recvq/fax000002927.tif from SA, route to <unspecified>, 1 pages in 0:10
Mar 25 08:06:51.30: [ 1150]: --> [29:+FTSI: "SA"]
Mar 25 08:06:51.31: [ 1150]: RECV FAX: bin/faxrcvd "recvq/fax000002927.tif" "ttyS0" "000004299" "" "" ""
Mar 25 08:06:51.31: [ 1150]: RECV FAX: end
Mar 25 08:06:51.31: [ 1150]: SESSION END
Both modems are used as Class2
Thanks for your reply
____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
- Follow-Ups:
- Prev by Date: Re: [hylafax-users] A Hint about Devolo Microlink Fun II and Failure to train remote modem
- Next by Date: Re: [hylafax-users] minimum Hardware requirement
- Previous by thread: [hylafax-users] EOP between 2 hylafax server with Multitech 5656 modem
- Next by thread: Re: [hylafax-users] EOP between 2 hylafax server with Multitech 5656 modem
- Index(es):
Project hosted by iFAX Solutions