![]() |
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Am Mittwoch, 23. März 2005 21:21 schrieb Lee Howard: > Heino Backhaus wrote: > > I took the generic class1 configfile as template and changed the > > following parameters: > > ModemRate: 57600 # rate for DCE-DTE communication > > ModemFlowControl: rtscts # RTS/CTS flow control assumed > > ModemResetCmds: "AT&FV1E0&D2&C1S0=0+MR=0;+DR=1;+ER=1;+ILRR=0" > > ModemNoFlowCmd: AT+ifc=0,0; # (&K) disable flow control cmd > > ModemHardFlowCmd: AT+ifc=2,2; # (&K3) hardware flow control cmd > > ModemSoftFlowCmd: AT+ifc=1,1; # (&K4) software flow control cmd > > Have you done the work to learn *which* of these several AT commands are > the ones that made the difference? > > For example, in your ModemResetCmds you have ATS0=0 which certainly can > be removed. Likewise ATE0. I'm not sure about AT&D2 and AT&C1, but I > think that these are basic configuration settings that would be best > altered elsewhere (other than ModemResetCmds). AT&F probably > accomplishes the same thing as ATZ, so that's unnecessary most likely. > ATV1 is also probably not needed or is better configured elsewhere. So > I think that brings us down to: > > AT+MR=0, AT+DR=1, AT+ER=1, and AT+ILRR=0. Do you know what these > settings do? > > Do the traditional AT&K, AT&K3, and AT&K4 not work on your modem? > > Lee. > Hi Lee, Hi Heino. Hi List I have had the same problems with this modem see: http://www.hylafax.org/archive/2004-11/msg00271.php this problem occurs with brother fax machines only. they identify themselves as: NSF remote fax equipment: Brother Intellifax 770 or NSF remote fax equipment: Brother I will check this config file and see if the brother machines will then talk to the modem correctly. - -- HAGOS eG phone: +49 711 7880592 Matthias Reich fax: +49 711 7880535 Industriestr. 62 web: http://www.hagos.de D-70565 Stuttgart mail: rei@xxxxxxxx Germany -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.0 (GNU/Linux) iD8DBQFCQljJcjMVLPQ5oUkRAv1RAJ9eocvJMtI7SfkrzEmEGemx7nTpMwCffhgs yY/qSYQ6kERRt2m8xkc4TeE= =4iR2 -----END PGP SIGNATURE----- ____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*