Re: [hylafax-users] MT5634ZBA-V92 with Hylafax

[Samuel De Leon <SDIAZDELEON@xxxxxxxxxxxxx>]

Sam,

I have installed the MT5634ZBA -V.92 modem in Linux Red Hat Enterprise
running Hylafax fax server .4.21

I installed the modem as class 2 fax modems and I left all  the defaults in
the software.
I ran a test receiving faxes from 3 different fax machines and I can not
make the faxes to fail.
From the tif file that you sent me it seems that the problem is do the FBOR
setting.

Try setting the command AT+FBOR=1  or AT+FBOR=0   in your configuration file
for what ever tty port the software is using. This will set the reverse bit
order while receiving.

At this point I can not tell you how to set the software to receive voice
and data calls, due that you need to configure Hylafax with the right getty
program to take the data call.

This is the info from Hylafax setup documentation;

"Call answering is done as follows: 
1. Send the modem one of ModemAnswerDataCmd, ModemAnswerFaxCmd, and
ModemAnswerVoiceCmd according to whether the call is to be answered as data,
fax, or voice, respectively. If any of these are not set then ModemAnswerCmd
is used instead. 
2. Wait for a response from the modem that signifies carrier has been
established and which identifies the type of call. The exact set of
responses is given in config(4F). 
3. If ModemWaitForConnect is enabled, then HylaFAX will read responses from
the modem until a CONNECT response is sent to the host or an error is
detected; e.g. 
4. Host      Modem
5. ATA  -->
6.      <--  DATA
     <--  CONNECT
7. If a call is successfully answered, then one of ModemAnswerDataBeginCmd,
ModemAnswerFaxBeginCmd, and ModemAnswerVoiceBeginCmd, is sent to the modem
according to the call type deduced above. This mechanism is useful for
modems that automatically change DTE-DCE communication to a fixed line speed
or flow control setting for inbound facsimile calls. 
At this point the call has been answered, carrier established, and the call
type is known. 
* Data calls are handled by invoking a system getty program; but only if the
GettyArgs parameter is set. 
* Voice calls are handled by invoking a system vgetty program; but only if
the VGettyArgs parameter is set. 
* Facsimile calls are handled directly in faxgetty. 
For a data or voice call faxgetty forks and execs the appropriate program.
The UUCP lock file is setup so that it is owned by the child (important for
SLIP and PPP) and the parent handles cleanup of various resources when the
child process terminates. 
For fax operation faxgetty drops into the facsimile receive protocol. "
So is seems that if the configuration in the software is not correct  the
data call will not work.
I just tried setting adaptive answer  in the software and the modem will
answer in either fax or data mode.
The problem is this the configuration in that my configuration somewhere in
the system is wrong and this what the log file is showing.
 
Mar 22 14:37:01.92: [ 3145]: HylaFAX (tm) Version 4.2.1
Mar 22 14:37:01.92: [ 3145]: <-- [4:ATA\r]
Mar 22 14:37:06.03: [ 3145]: --> [4:DATA]
Mar 22 14:37:06.03: [ 3145]: ANSWER: DATA CONNECTION
Mar 22 14:37:06.05: [ 3145]: runGetty::initgroups: Operation not permitted
Mar 22 14:37:06.06: [ 3145]: GETTY: START "/sbin/agetty -h ttyS0 dx_19200",
pid
6310
Mar 22 14:37:16.14: [ 3145]: GETTY: exit status 0400
Mar 22 14:37:16.14: [ 3145]: SESSION END
So at this point the modem will answer in fax or data mode but the software
the system and the software need to be configured correctly. I'm not an
expert in Hylafax or Linux this is the reason  I can not tell you what to
check.
The problem shown above may be due a permition in some file ( I guess)

Regards,


Samuel.








-----Original Message-----
From: Sam Przyswa [mailto:samp@xxxxxxxxxxxxxxxxx]
Sent: Tuesday, March 22, 2005 7:27 AM
To: Hylafax User list
Cc: Loic Kervenec; Samuel De Leon
Subject: MT5634ZBA-V92 with Hylafax

Hi,

I'm very sorry but after one week to search, testing lot of setup I
can't nor receive and send data call, and the incoming fax are
corrupted, see the attachment.

So , *PLEASE*, give me the right configuration (config.ttySx) to make me
able to receive faxes and data calls with the MT5634ZBA-V92

Or give me a list of modem well supported by Hylafax, I don't find it on
www.hylafax.org.

Sam.

--

Sam Przyswa - Chef de projet
Arial Concept - Intégrateur Internet
36, rue de Turin - 75008 - Paris - France
Tel: 01 40 54 86 04 - Fax: 01 40 54 83 01
Web: http://www.arial-concept.com - Email: Info@xxxxxxxxxxxxxxxxx



--
Ce message a été vérifié par MailScanner
pour des virus ou des polluriels et rien de
suspect n'a été trouvé.


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*