HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] MT5634ZBA-V92 with Hylafax



> -----Original Message-----
> From: Giulio Orsero [mailto:giulioo@xxxxxxxxx]

> On Tue, 22 Mar 2005 14:26:32 +0100, Sam Przyswa 
> <samp@xxxxxxxxxxxxxxxxx> wrote:
> > can't nor receive and send data call, and the incoming fax are
> > corrupted, see the attachment.
> > So , *PLEASE*, give me the right configuration 
> (config.ttySx) to make me
> > able to receive faxes and data calls with the MT5634ZBA-V92
> 
> 1) fax usage
> If you actually cannot get faxaddmodem to see the modem, then install
> by hand the file /var/spool/hylafax/config/lucent-mt-10 as you config
> file (ie: /var/spool//ylafax/etc/config.ttyS0)
> Then restart faxgetty and try sending and receiving faxes.

Incidentally, I missed the original post, but my experience is that Hylafax
4.2.1 does a much better job with my MT5634ZBA-DID than Hylafax 4.1.x did.
If the original poster is still using 4.1.x, they might want to try
upgrading and running faxaddmodem again.

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*




Project hosted by iFAX Solutions