HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] E1/T1 cards from digium and HylaFAX




"Miroslav Zubcic" <mvz@xxxxxxxxxx> wrote:


Hi everyone!

After searching the web, greping documentation and reading this list,
I cannot find definitive answer for my dilema: Does any of this E1/T1
cards work with HylaFAX?

Miroslav,


Those boards, when used with Asterisk, will help you deliver a T1 to HylaFAX but they don't have any fax capability themselves. You'd need a fax board with an E1 interface, such as a Brooktrout TR1034 or an Eicon Diva Server E1/PRI board. I'm not aware if Digi/Patton make an E1 board, but they might.

Unless you decide to go the route of using t.38 to 'virtualize' those 30 channels (would require a t.38 capable gateway), or you think SpanDSP is good enough for you (in which case you don't use HylaFAX at all) then you're looking at board-based faxing, and you'll need a fax board for that.

-Darren

--
Darren Nickerson
Senior Sales & Support Engineer
iFAX Solutions, Inc. www.ifax.com
darren.nickerson@xxxxxxxx
+1.215.438.4638 x8106
+1.215.243.8335 (fax)


____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*




Project hosted by iFAX Solutions