Re: [hylafax-users] Help needed with blank pages

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

Part of the problem in finding help here is that you're using 
CAPI4HylaFAX, which is not really well-supported in this forum.  
Hopefully they have a different mailing list or such that you can use 
for better help.

Lee.


Martin Ziegler wrote:

> Hi All,
>
> i'm quite new to Hylafax and any help is highly appreciated. I know 
> that this is an "well known issue" and i already browsed through the 
> mailinglist archive but unfortunately i couldn't resolve the issue. So 
> forgive me please ;-)
>
> Just installed the latest version of Hylafax and in general everything 
> works fine without the exception that all sent faxes are blank. Only 
> the status bar at the top of the page is there.
>
> Please find below my configuration. Would be great if someone could 
> point me into the right direction. Thanks in advance !
>
> Cheers, Martin
>
> Redhat 9
> Kernel 2.6.10
> AVM Fritzcard PCI (A1)
> fcpci-suse9.1-3.11-02.tar.gz
> capi4hylafax-01.02.02 (patched)
> capi4k-utils-2005-03-04.tar.gz
> tiff-3.7.1.tar.gz
>
> --- config ---
> LogFacility:            daemon
> CountryCode:            49
> AreaCode:               2365
> LongDistancePrefix:     0
> InternationalPrefix:    00
> DialStringRules:        "etc/dialrules"
> ServerTracing:          527
> DestControls:           destinations
> MaxSendPages:           30
> PostScriptTimeout:      600
> SessionTracing:         527
> SendFaxCmd:             /sys/hylafax/bin/c2faxsend
>
> --- config.c2fax linked to config --
>
> --- config.faxCAPI ---
> SpoolDir:               /sys/hylafax/spool
> FaxRcvdCmd:             /sys/hylafax/spool/bin/faxrcvd
> PollRcvdCmd:             /var/spool/fax/bin/pollrcvd
> FaxReceiveUser:         uucp
> LogFile: /var/log/hylafax
> LogTraceLevel:          4
> LogFileMode:            0600
>    HylafaxDeviceName:          capi20
>    RecvFileMode:               0600
>    LocalIdentifier:            "+492365xxxxxx"
>    MaxConcurrentRecvs:         2
>    OutgoingController:         1
>    OutgoingMSN:                1
>    SuppressMSN:                0
>    NumberPrefix:
>    UseISDNFaxService:          0
>    RingingDuration:            0
>        Controller:             1
>        AcceptSpeech:           0
>        UseDDI:                 0
>        DDIOffset:
>        DDILength:              0
>        IncomingDDIs:
>        IncomingMSNs:           1
>        AcceptGlobalCall:   1
>
> --- config.capi20 linked to config.faxCAPI ---
>
> --- config.faxCAPI.c2fax linked to config.faxCAPI ---
>
> --- setup.cache ---
> AWK='/bin/gawk'
> BIN='/sys/hylafax/bin'
> CAT='/bin/cat'
> CHGRP='/bin/chgrp'
> CHMOD='/bin/chmod'
> CHOWN='/bin/chown'
> CP='/bin/cp'
> DPSRIP='/usr/local/sbin/ps2fax.exe'
> ECHO='/bin/echo'
> ENCODING='x-uuencode'
> FAXQ_SERVER='yes'
> FONTPATH='/usr/share/ghostscript/7.05/lib:/usr/share/ghostscript/7.05/vflib:/usr/share/ghostscript/fonts:/usr/share/fonts/defaul 
>
> t/ghostscript:/usr/share/fonts/default/Type1:/usr/share/fonts/default/amspsfnt/pfb:/usr/share/fonts/default/cmpsfont/pfb' 
>
> FUSER='/sbin/fuser'
> GREP='/bin/grep'
> GSRIP='/usr/bin/gs'
> HFAXD_OLD_PROTOCOL='no'
> HFAXD_SERVER='yes'
> HFAXD_SNPP_SERVER='no'
> IMPRIP='/usr/lib/print/psrip'
> LIBDATA='/sys/hylafax/lib/fax'
> LIBEXEC='/sys/hylafax/sbin'
> LN='/bin/ln'
> MANDIR='/sys/hylafax/man'
> MIMENCODE='base64-encode'
> MKFIFO='/usr/bin/mkfifo'
> MV='/bin/mv'
> PATHEGETTY='/bin/egetty'
> PATHGETTY='/sbin/agetty'
> PATH='/usr/sbin:/bin:/usr/bin:/etc:/usr/local/bin'
> PATHVGETTY='/sbin/vgetty'
> PSPACKAGE='gs'
> RM='/bin/rm'
> SBIN='/sys/hylafax/sbin'
> SCRIPT_SH='/bin/bash'
> SED='/bin/sed'
> SENDMAIL='/usr/sbin/sendmail'
> SPOOL='/sys/hylafax/spool'
> SYSVINIT=''
> TARGET='i686-pc-linux-gnu'
> TIFFBIN='/usr/bin'
> TTYCMD='/usr/bin/tty'
> UUCP_LOCKDIR='/var/lock/uucp'
> UUCP_LOCKTYPE='ascii'
> UUENCODE='/usr/bin/uuencode'
>
> --- setup.modem ---
> prompt()
> {
>   echo -n "$* "
> }
>            ttyPort()
>            {
>                expr $1 : 'tty\(.*\)'
>            }
>            ttyLocks()
>            {
>                echo $UUCP_LOCKDIR/LCK..`expr /$1 : '.*/\(.*\)'`
>            }
>            ttyAliases()
>            {
>                echo /dev/$1
>            }
>            ttyDev()
>            {
>                echo /dev/$1
>            }
>            checkPort()
>            {
>                 return
>            }
>            ttyStty()
>            {
>                echo /bin/stty
>            }
>            ttySpeeds()
>            {
>                speeds=
>                if [ -z "$SPEED" ]; then
>                    for s in 38400 19200 9600 4800 2400 1200; do
>                        onDev /bin/stty $s </dev/null >/dev/null 2>&1 
> && speeds="$speeds $s"
>                    done
>                fi
>                echo $speeds
>            }
>
> --- hfaxd.conf ---
> LogFacility:            daemon          # syslog facility (want this 
> 1st))
> ServerTracing:          0x001           # just server operation
> (Everything else is hashed out)
>
>
> ____________________ HylaFAX(tm) Users Mailing List 
> _______________________
>  To subscribe/unsubscribe, click 
> http://lists.hylafax.org/cgi-bin/lsg2.cgi
> On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < 
> /dev/null
>  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*