Re: [hylafax-users] MultiTech ISI card failure

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

On 2005.02.07 14:55 Peter Halliday wrote:

> Feb 07 11:44:24.76: [22677]: SEND training at v.17 14400 bit/s
> Feb 07 11:44:24.76: [22677]: <-- [9:AT+FTH=3\r]
> Feb 07 11:44:25.73: [22677]: --> [7:CONNECT]
> Feb 07 11:44:25.73: [22677]: <-- data [23]
> Feb 07 11:44:25.73: [22677]: <-- data [2]
> Feb 07 11:44:25.75: [22677]: --> [7:CONNECT]
> Feb 07 11:44:25.75: [22677]: <-- data [6]
> Feb 07 11:44:25.75: [22677]: <-- data [2]
> Feb 07 11:44:26.90: [22677]: --> [2:OK]
> Feb 07 11:44:26.90: [22677]: <-- [9:AT+FTS=7\r]
> Feb 07 11:44:26.96: [22677]: --> [2:OK]
> Feb 07 11:44:26.96: [22677]: <-- [11:AT+FTM=145\r]
> Feb 07 11:44:26.97: [22677]: --> [7:CONNECT]
> Feb 07 11:44:26.97: [22677]: DELAY 400 ms
> Feb 07 11:44:27.37: [22677]: <-- data [1024]
> Feb 07 11:44:27.37: [22677]: <-- data [1024]
> Feb 07 11:44:27.37: [22677]: <-- data [652]
> Feb 07 11:44:27.37: [22677]: <-- data [2]
> Feb 07 11:44:30.14: [22677]: --> [2:OK]
> Feb 07 11:44:30.14: [22677]: <-- [9:AT+FRH=3\r]
> Feb 07 11:44:30.52: [22677]: --> [7:CONNECT]
> Feb 07 11:44:31.57: [22677]: --> [10:NO CARRIER]

The "NO CARRIER" indicates that, after detecting a V.21 carrier coming 
from the sender, the carrier was lost before any data was received from 
it.

What kind of phone lines are you using (is there a PBX involved)?  Is 
1.32b the newest firmware for the ISI cards?  If not, you should try 
updating it.

Lee.

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*