Re: [hylafax-users] Fax received with empty tif file with Eicon Diva BRI card

[Sam Przyswa <samp@xxxxxxxxxxxxxxxxx>]

P a écrit :

> --- Sam Przyswa <samp@xxxxxxxxxxxxxxxxx> wrote:
>
>  
>
> > Lee Howard a écrit :
> >
> >    
> >
> > > On 2005.01.18 05:46 Sam Przyswa wrote:
> > >
> > >      
> > >
> > > > We use an Eicon Diva BRI PCI card with Hylafax
> > > >        
> > 1:4.1.2-2.2 since more 
> >    
> >
> > > > than one year and we noticed (less than  0.2%)
> > > >        
> > some received fax are 
> >    
> >
> > > > empty (only 439 bytes) the same sender have no
> > > >        
> > problems to send faxes 
> >    
> >
> > > > on analogic fax-modem (USrobotic) with Hylafax.
> > > >        
> > > You may be able to work around the problem by
> > >      
> > switching to Class 1... 
> >    
> >
> > > if somehow that triggers a different behavior
> > >      
> > internally on the part 
> >    
> >
> > > of the Diva.  However, you're likely to run into
> > >      
> > other problems after 
> >    
> >
> > > doing that, since I tend to belive that the Diva
> > >      
> > Server was intended 
> >    
> >
> > > to be run in Class 2.
> > >
> > >      
> > I tried to switch to Class 1 by replace all Class2
> > settings with the 
> > Class 1 setup from ./config/class1 but the tty don't
> > setup correctly  I 
> > got message:
> >
> > Unable to setup modem on /dev/ttyI3; giving up after
> > 2 attempts
> >
> > How to force a Class1 tty setup with faxaddmodem ?
> >    
>
> faxaddmodem ttyI3 and when asked for Class set it to
> 1.
>
>  
My faxaddmodem don't ask me the class set it just told me that it's a 
Class2 compatible modem and configure it as Class2 modem !?

Sam.


--
Ce message a été vérifié par MailScanner
pour des virus ou des polluriels et rien de
suspect n'a été trouvé.
MailScanner remercie transtec pour son soutien.


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*