![]() |
--- Sam Przyswa <samp@xxxxxxxxxxxxxxxxx> wrote: > P a écrit : > > >--- Sam Przyswa <samp@xxxxxxxxxxxxxxxxx> wrote: > > > > > > > >>Lee Howard a écrit : > >> > >> > >> > >>>On 2005.01.18 05:46 Sam Przyswa wrote: > >>> > >>> > >>> > >>>>We use an Eicon Diva BRI PCI card with Hylafax > >>>> > >>>> > >>1:4.1.2-2.2 since more > >> > >> > >>>>than one year and we noticed (less than 0.2%) > >>>> > >>>> > >>some received fax are > >> > >> > >>>>empty (only 439 bytes) the same sender have no > >>>> > >>>> > >>problems to send faxes > >> > >> > >>>>on analogic fax-modem (USrobotic) with Hylafax. > >>>> > >>>> > >>>You may be able to work around the problem by > >>> > >>> > >>switching to Class 1... > >> > >> > >>>if somehow that triggers a different behavior > >>> > >>> > >>internally on the part > >> > >> > >>>of the Diva. However, you're likely to run into > >>> > >>> > >>other problems after > >> > >> > >>>doing that, since I tend to belive that the Diva > >>> > >>> > >>Server was intended > >> > >> > >>>to be run in Class 2. > >>> > >>> > >>> > >>I tried to switch to Class 1 by replace all Class2 > >>settings with the > >>Class 1 setup from ./config/class1 but the tty > don't > >>setup correctly I > >>got message: > >> > >>Unable to setup modem on /dev/ttyI3; giving up > after > >>2 attempts > >> > >>How to force a Class1 tty setup with faxaddmodem ? > >> > >> > > > >faxaddmodem ttyI3 and when asked for Class set it > to > >1. > > > > > > > My faxaddmodem don't ask me the class set it just > told me that it's a > Class2 compatible modem and configure it as Class2 > modem !? > > Sam. Well, when I configure my modems I always get a message like "Ummm, this modem looks like a Class 1 modem" and right after this question ask me to set the Class. I'm not familiar with Eicon or any digital cards so, it's just a guess. __________________________________ Do you Yahoo!? Yahoo! Mail - Find what you need with new enhanced search. http://info.mail.yahoo.com/mail_250 ____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*