HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] Fax received with empty tif file with Eicon Diva BRI card



--- Sam Przyswa <samp@xxxxxxxxxxxxxxxxx> wrote:

> Lee Howard a écrit :
> 
> > On 2005.01.18 05:46 Sam Przyswa wrote:
> >
> >> We use an Eicon Diva BRI PCI card with Hylafax
> 1:4.1.2-2.2 since more 
> >> than one year and we noticed (less than  0.2%)
> some received fax are 
> >> empty (only 439 bytes) the same sender have no
> problems to send faxes 
> >> on analogic fax-modem (USrobotic) with Hylafax.
> >
> >
> > You may be able to work around the problem by
> switching to Class 1... 
> > if somehow that triggers a different behavior
> internally on the part 
> > of the Diva.  However, you're likely to run into
> other problems after 
> > doing that, since I tend to belive that the Diva
> Server was intended 
> > to be run in Class 2.
> >
> I tried to switch to Class 1 by replace all Class2
> settings with the 
> Class 1 setup from ./config/class1 but the tty don't
> setup correctly  I 
> got message:
> 
> Unable to setup modem on /dev/ttyI3; giving up after
> 2 attempts
> 
> How to force a Class1 tty setup with faxaddmodem ?

faxaddmodem ttyI3 and when asked for Class set it to
1.



> 
> Sam.


Pedro

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*




Project hosted by iFAX Solutions