Re: [hylafax-users] Fax received with empty tif file with Eicon Diva BRI card

[Sam Przyswa <samp@xxxxxxxxxxxxxxxxx>]

Lee Howard a écrit :

> On 2005.01.18 05:46 Sam Przyswa wrote:
>
> > We use an Eicon Diva BRI PCI card with Hylafax 1:4.1.2-2.2 since more 
> > than one year and we noticed (less than  0.2%) some received fax are 
> > empty (only 439 bytes) the same sender have no problems to send faxes 
> > on analogic fax-modem (USrobotic) with Hylafax.
>
>
> You may be able to work around the problem by switching to Class 1... 
> if somehow that triggers a different behavior internally on the part 
> of the Diva.  However, you're likely to run into other problems after 
> doing that, since I tend to belive that the Diva Server was intended 
> to be run in Class 2.
I tried to switch to Class 1 by replace all Class2 settings with the 
Class 1 setup from ./config/class1 but the tty don't setup correctly  I 
got message:

Unable to setup modem on /dev/ttyI3; giving up after 2 attempts

How to force a Class1 tty setup with faxaddmodem ?

Sam.


--
Ce message a été vérifié par MailScanner
pour des virus ou des polluriels et rien de
suspect n'a été trouvé.
MailScanner remercie transtec pour son soutien.


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*