HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] USR 5601 98F7 giving error: T.30 T2 timeout, expected page not received



Lee Howard wrote on 20/12/04 04:18 PM:

On 2004.12.20 12:40 marthter wrote:

Linux (RedHat 9)
HylaFAX 4.2.0 from rpm (hylafax-4.2.0-1rh9)


USR internal 56K modem on ttyS4 (this is receive only and has the problem):
ati0: 5601
ati1: 98F7
ati2: OK
ati3: U.S. Robotics 56K FAX INT Rev. 5.22.16


Dec 20 13:56:08.78: [18839]: <-- [11:AT+FRM=146\r]
Dec 20 13:56:10.04: [18839]: --> [7:CONNECT]
Dec 20 13:56:10.04: [18839]: RECV: begin page
Dec 20 13:56:12.34: [18839]: RECV/CQ: Bad 1D pixel count, row 120, got 2087, expected 1728
Dec 20 13:56:12.34: [18839]: RECV/CQ: Adjusting for trailing noise (1 run)
Dec 20 13:56:12.34: [18839]: RECV: 120 total lines, 0 bad lines, 0 consecutive bad lines
Dec 20 13:56:12.34: [18839]: RECV: end page
Dec 20 13:56:12.34: [18839]: --> [10:NO CARRIER]
Dec 20 13:56:12.34: [18839]: <-- [9:AT+FRH=3\r]
Dec 20 13:56:16.21: [18839]: --> [7:CONNECT]
Dec 20 13:56:16.21: [18839]: --> [19:59 CD 45 15 3B 88 A5 D1 44 28 40 87 9D 3A CF CB 1C 10 03]
Dec 20 13:56:16.21: [18839]: --> [5:ERROR]


The modem is detecting a carrier drop when there isn't one and then is accepting V.17 data with the V.21 setting.

120 lines would be a very short page at 3.85 l/mm (1.2 inches). The data that is received that produces the ERRORs after that is still image data.

Yes, the partial tiff that was delivered was only a small fraction of a page. Other attempts got further (several pages) as I said.


So the modem is detecting a carrier drop when it shouldn't be. Most likely this is the fault of the modem, but it could be that there really was some event on the line that caused a temporary carrier drop. The modem shouldn't be reading in image data with the V.21 setting, but I'm not a modulator guru, and maybe this is unavoidable.

Well there are other phones on that line and it is possible someone picked one up, but that wouldn't be it 9 times in a row.


When I encounter any error and a USR modem is involved I always, always blame the modem first unless I have good evidence otherwise.

Lee.

Hmm, yeah, but "it was working before" (tm) and "the setup has not changed" (tm).


So you would not expect the latest CVS to make any difference?

Thank you for your reply.

Martin




____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*




Project hosted by iFAX Solutions