[hylafax-users] Incomplete Fax Reception

[George Bell <gbell5@xxxxxxx>]

The sender: A standalone fax machine Panasonic KX-FP121 from Staples, about 5
                  yr old.

The receiver: Hylafax 4.2.0 from source, SuSE 8.0 Kernel 2.4.18 in class 1,
                    Multitech 5634ZPX-PCI

I've posted a log from this sender before but this time I've got 
SessionTracing to 0xFF.   The sender sent a fax consisting of two pages and 
no cover page.  Only the second of the two pages were received.  I've posted 
the resulting tif from this session onto my ftp server: 
ftp://georgebell.no-ip.com/Faxes/fax000000134.tif.  I have been able to send 
faxes to this machine but receiving them is usually a problem. 

The Session Log:

Nov 28 19:26:53.93: [ 2811]: SESSION BEGIN 000000092 15713210207
Nov 28 19:26:53.93: [ 2811]: HylaFAX (tm) Version 4.2.0
Nov 28 19:26:53.93: [ 2811]: <-- [4:ATA\r]
Nov 28 19:26:58.21: [ 2811]: --> [3:FAX]
Nov 28 19:26:58.21: [ 2811]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyS4'
Nov 28 19:26:58.21: [ 2811]: MODEM input buffering enabled
Nov 28 19:26:58.22: [ 2811]: RECV FAX: begin
Nov 28 19:26:58.22: [ 2811]: MODEM input buffering disabled
Nov 28 19:26:58.22: [ 2811]: <-- HDLC<32:FF C0 04 AD 00 55 12 9E 36 86 62 82 
1A 04 14 2E B6 94 04 6A A6 4E CE 96 F6 76 04 2C 74 4C 74 0C>
Nov 28 19:26:58.22: [ 2811]: <-- data [32]
Nov 28 19:26:58.22: [ 2811]: <-- data [2]
Nov 28 19:26:58.22: [ 2811]: --> [3:FAX]
Nov 28 19:26:58.22: [ 2811]: DELAY 1500 ms
Nov 28 19:26:59.71: [ 2811]: <-- [9:AT+FTH=3\r]
Nov 28 19:26:59.72: [ 2811]: --> [6:      ]
Nov 28 19:26:59.72: [ 2811]: DELAY 1500 ms
Nov 28 19:27:01.22: [ 2811]: <-- [9:AT+FTH=3\r]
Nov 28 19:27:01.22: [ 2811]: --> [5:ERROR]
Nov 28 19:27:01.22: [ 2811]: DELAY 1500 ms
Nov 28 19:27:02.72: [ 2811]: <-- [9:AT+FTH=3\r]
Nov 28 19:27:02.72: [ 2811]: --> [5:ERROR]
Nov 28 19:27:02.72: [ 2811]: DELAY 1500 ms
Nov 28 19:27:04.22: [ 2811]: <-- [9:AT+FTH=3\r]
Nov 28 19:27:04.22: [ 2811]: --> [7:CONNECT]
Nov 28 19:27:04.22: [ 2811]: <-- HDLC<32:FF C0 04 AD 00 55 12 9E 36 86 62 82 
1A 04 14 2E B6 94 04 6A A6 4E CE 96 F6 76 04 2C 74 4C 74 0C>
Nov 28 19:27:04.22: [ 2811]: <-- data [32]
Nov 28 19:27:04.23: [ 2811]: <-- data [2]
Nov 28 19:27:05.96: [ 2811]: --> [2:OK]
Nov 28 19:27:05.96: [ 2811]: DELAY 1500 ms
Nov 28 19:27:07.46: [ 2811]: <-- [9:AT+FTH=3\r]
Nov 28 19:27:08.42: [ 2811]: --> [7:CONNECT]
Nov 28 19:27:08.42: [ 2811]: <-- HDLC<32:FF C0 04 AD 00 55 12 9E 36 86 62 82 
1A 04 14 2E B6 94 04 6A A6 4E CE 96 F6 76 04 2C 74 4C 74 0C>
Nov 28 19:27:08.42: [ 2811]: <-- data [32]
Nov 28 19:27:08.42: [ 2811]: <-- data [2]
Nov 28 19:27:08.43: [ 2811]: --> [7:CONNECT]
Nov 28 19:27:08.43: [ 2811]: <-- HDLC<23:FF C0 02 82 CA AA 82 6A 32 32 A2 42 
E2 EC 0C 4C 0C 8C 4C CC 8C EC AC>
Nov 28 19:27:08.43: [ 2811]: <-- data [23]
Nov 28 19:27:08.43: [ 2811]: <-- data [2]
Nov 28 19:27:08.44: [ 2811]: --> [7:CONNECT]
Nov 28 19:27:08.44: [ 2811]: <-- HDLC<10:FF C8 01 00 76 5F 23 01 FB C0>
Nov 28 19:27:08.44: [ 2811]: <-- data [10]
Nov 28 19:27:08.44: [ 2811]: <-- data [2]
Nov 28 19:27:10.75: [ 2811]: --> [2:OK]
Nov 28 19:27:10.75: [ 2811]: <-- [9:AT+FRH=3\r]
Nov 28 19:27:13.85: [ 2811]: --> [0:]
Nov 28 19:27:13.85: [ 2811]: MODEM <Empty line>
Nov 28 19:27:13.85: [ 2811]: MODEM TIMEOUT: waiting for v.21 carrier
Nov 28 19:27:13.85: [ 2811]: <-- data [1]
Nov 28 19:27:13.86: [ 2811]: --> [2:  ]
Nov 28 19:27:13.86: [ 2811]: --> [2:OK]
Nov 28 19:27:13.86: [ 2811]: DELAY 1500 ms
Nov 28 19:27:15.36: [ 2811]: <-- [9:AT+FTH=3\r]
Nov 28 19:27:16.32: [ 2811]: --> [7:CONNECT]
Nov 28 19:27:16.32: [ 2811]: <-- HDLC<32:FF C0 04 AD 00 55 12 9E 36 86 62 82 
1A 04 14 2E B6 94 04 6A A6 4E CE 96 F6 76 04 2C 74 4C 74 0C>
Nov 28 19:27:16.32: [ 2811]: <-- data [32]
Nov 28 19:27:16.32: [ 2811]: <-- data [2]
Nov 28 19:27:16.33: [ 2811]: --> [7:CONNECT]
Nov 28 19:27:16.33: [ 2811]: <-- HDLC<23:FF C0 02 82 CA AA 82 6A 32 32 A2 42 
E2 EC 0C 4C 0C 8C 4C CC 8C EC AC>
Nov 28 19:27:16.33: [ 2811]: <-- data [23]
Nov 28 19:27:16.33: [ 2811]: <-- data [2]
Nov 28 19:27:16.34: [ 2811]: --> [7:CONNECT]
Nov 28 19:27:16.34: [ 2811]: <-- HDLC<10:FF C8 01 00 76 5F 23 01 FB C0>
Nov 28 19:27:16.34: [ 2811]: <-- data [10]
Nov 28 19:27:16.34: [ 2811]: <-- data [2]
Nov 28 19:27:18.65: [ 2811]: --> [2:OK]
Nov 28 19:27:18.65: [ 2811]: <-- [9:AT+FRH=3\r]
Nov 28 19:27:19.34: [ 2811]: --> [7:CONNECT]
Nov 28 19:27:21.25: [ 2811]: --> HDLC<25:FF C0 C2 04 04 04 04 04 04 04 04 04 
04 EC 1C 0C AC CC 1C 1C 9C 0C 6C C0 86>
Nov 28 19:27:21.25: [ 2811]: --> [2:OK]
Nov 28 19:27:21.25: [ 2811]: REMOTE TSI "6098835087"
Nov 28 19:27:21.25: [ 2811]: <-- [9:AT+FRH=3\r]
Nov 28 19:27:21.26: [ 2811]: --> [7:CONNECT]
Nov 28 19:27:21.53: [ 2811]: --> HDLC<8:FF C8 C1 00 44 1E 63 22>
Nov 28 19:27:21.53: [ 2811]: --> [2:OK]
Nov 28 19:27:21.53: [ 2811]: REMOTE wants 14400 bit/s
Nov 28 19:27:21.53: [ 2811]: REMOTE wants A4 page width (215 mm)
Nov 28 19:27:21.53: [ 2811]: REMOTE wants unlimited page length
Nov 28 19:27:21.54: [ 2811]: REMOTE wants 3.85 line/mm
Nov 28 19:27:21.54: [ 2811]: REMOTE wants 1-D MH
Nov 28 19:27:21.54: [ 2811]: <-- [9:AT+FRH=3\r]
Nov 28 19:27:21.54: [ 2811]: --> [7:CONNECT]
Nov 28 19:27:21.64: [ 2811]: --> [2:  ]
Nov 28 19:27:21.64: [ 2811]: --> [10:NO CARRIER]
Nov 28 19:27:21.64: [ 2811]: RECV training at v.17 14400 bit/s
Nov 28 19:27:21.64: [ 2811]: <-- [11:AT+FRM=145\r]
Nov 28 19:27:26.14: [ 2811]: --> [0:]
Nov 28 19:27:26.14: [ 2811]: MODEM <Empty line>
Nov 28 19:27:26.14: [ 2811]: MODEM TIMEOUT: receiving TCF
Nov 28 19:27:26.14: [ 2811]: <-- data [1]
Nov 28 19:27:26.15: [ 2811]: --> [2:  ]
Nov 28 19:27:26.15: [ 2811]: --> [2:OK]
Nov 28 19:27:26.15: [ 2811]: DELAY 75 ms
Nov 28 19:27:26.23: [ 2811]: <-- [9:AT+FTH=3\r]
Nov 28 19:27:27.19: [ 2811]: --> [7:CONNECT]
Nov 28 19:27:27.19: [ 2811]: <-- HDLC<3:FF C8 22>
Nov 28 19:27:27.19: [ 2811]: <-- data [3]
Nov 28 19:27:27.19: [ 2811]: <-- data [2]
Nov 28 19:27:27.69: [ 2811]: --> [2:OK]
Nov 28 19:27:27.69: [ 2811]: TRAINING failed
Nov 28 19:27:27.69: [ 2811]: <-- [9:AT+FRH=3\r]
Nov 28 19:27:28.77: [ 2811]: --> [7:CONNECT]
Nov 28 19:27:30.69: [ 2811]: --> HDLC<25:FF C0 C2 04 04 04 04 04 04 04 04 04 
04 EC 1C 0C AC CC 1C 1C 9C 0C 6C C0 86>
Nov 28 19:27:30.69: [ 2811]: --> [2:OK]
Nov 28 19:27:30.69: [ 2811]: REMOTE TSI "6098835087"
Nov 28 19:27:30.69: [ 2811]: <-- [9:AT+FRH=3\r]
Nov 28 19:27:30.70: [ 2811]: --> [7:CONNECT]
Nov 28 19:27:30.98: [ 2811]: --> HDLC<8:FF C8 C1 00 44 1E 63 22>
Nov 28 19:27:30.98: [ 2811]: --> [2:OK]
Nov 28 19:27:30.98: [ 2811]: REMOTE wants 14400 bit/s
Nov 28 19:27:30.98: [ 2811]: REMOTE wants A4 page width (215 mm)
Nov 28 19:27:30.98: [ 2811]: REMOTE wants unlimited page length
Nov 28 19:27:30.98: [ 2811]: REMOTE wants 3.85 line/mm
Nov 28 19:27:30.99: [ 2811]: REMOTE wants 1-D MH
Nov 28 19:27:30.99: [ 2811]: <-- [9:AT+FRH=3\r]
Nov 28 19:27:30.99: [ 2811]: --> [7:CONNECT]
Nov 28 19:27:31.07: [ 2811]: --> [2:  ]
Nov 28 19:27:31.07: [ 2811]: --> [10:NO CARRIER]
Nov 28 19:27:31.07: [ 2811]: RECV training at v.17 14400 bit/s
Nov 28 19:27:31.07: [ 2811]: <-- [11:AT+FRM=145\r]
Nov 28 19:27:35.57: [ 2811]: --> [0:]
Nov 28 19:27:35.57: [ 2811]: MODEM <Empty line>
Nov 28 19:27:35.57: [ 2811]: MODEM TIMEOUT: receiving TCF
Nov 28 19:27:35.57: [ 2811]: <-- data [1]
Nov 28 19:27:35.58: [ 2811]: --> [2:  ]
Nov 28 19:27:35.58: [ 2811]: --> [2:OK]
Nov 28 19:27:35.58: [ 2811]: DELAY 75 ms
Nov 28 19:27:35.66: [ 2811]: <-- [9:AT+FTH=3\r]
Nov 28 19:27:36.62: [ 2811]: --> [7:CONNECT]
Nov 28 19:27:36.62: [ 2811]: <-- HDLC<3:FF C8 22>
Nov 28 19:27:36.62: [ 2811]: <-- data [3]
Nov 28 19:27:36.62: [ 2811]: <-- data [2]
Nov 28 19:27:37.12: [ 2811]: --> [2:OK]
Nov 28 19:27:37.12: [ 2811]: TRAINING failed
Nov 28 19:27:37.12: [ 2811]: <-- [9:AT+FRH=3\r]
Nov 28 19:27:38.41: [ 2811]: --> [7:CONNECT]
Nov 28 19:27:40.32: [ 2811]: --> HDLC<25:FF C0 C2 04 04 04 04 04 04 04 04 04 
04 EC 1C 0C AC CC 1C 1C 9C 0C 6C C0 86>
Nov 28 19:27:40.33: [ 2811]: --> [2:OK]
Nov 28 19:27:40.33: [ 2811]: REMOTE TSI "6098835087"
Nov 28 19:27:40.33: [ 2811]: <-- [9:AT+FRH=3\r]
Nov 28 19:27:40.34: [ 2811]: --> [7:CONNECT]
Nov 28 19:27:40.62: [ 2811]: --> HDLC<8:FF C8 C1 00 54 1E 60 51>
Nov 28 19:27:40.62: [ 2811]: --> [2:OK]
Nov 28 19:27:40.62: [ 2811]: REMOTE wants 12000 bit/s
Nov 28 19:27:40.62: [ 2811]: REMOTE wants A4 page width (215 mm)
Nov 28 19:27:40.62: [ 2811]: REMOTE wants unlimited page length
Nov 28 19:27:40.62: [ 2811]: REMOTE wants 3.85 line/mm
Nov 28 19:27:40.63: [ 2811]: REMOTE wants 1-D MH
Nov 28 19:27:40.63: [ 2811]: <-- [9:AT+FRH=3\r]
Nov 28 19:27:40.63: [ 2811]: --> [7:CONNECT]
Nov 28 19:27:40.71: [ 2811]: --> [2:  ]
Nov 28 19:27:40.71: [ 2811]: --> [10:NO CARRIER]
Nov 28 19:27:40.71: [ 2811]: RECV training at v.17 12000 bit/s
Nov 28 19:27:40.71: [ 2811]: <-- [11:AT+FRM=121\r]
Nov 28 19:27:45.21: [ 2811]: --> [0:]
Nov 28 19:27:45.21: [ 2811]: MODEM <Empty line>
Nov 28 19:27:45.21: [ 2811]: MODEM TIMEOUT: receiving TCF
Nov 28 19:27:45.21: [ 2811]: <-- data [1]
Nov 28 19:27:45.22: [ 2811]: --> [2:  ]
Nov 28 19:27:45.22: [ 2811]: --> [2:OK]
Nov 28 19:27:45.22: [ 2811]: DELAY 75 ms
Nov 28 19:27:45.30: [ 2811]: <-- [9:AT+FTH=3\r]
Nov 28 19:27:46.26: [ 2811]: --> [7:CONNECT]
Nov 28 19:27:46.26: [ 2811]: <-- HDLC<3:FF C8 22>
Nov 28 19:27:46.26: [ 2811]: <-- data [3]
Nov 28 19:27:46.26: [ 2811]: <-- data [2]
Nov 28 19:27:46.76: [ 2811]: --> [2:OK]
Nov 28 19:27:46.76: [ 2811]: TRAINING failed
Nov 28 19:27:46.76: [ 2811]: <-- [9:AT+FRH=3\r]
Nov 28 19:27:47.87: [ 2811]: --> [7:CONNECT]
Nov 28 19:27:49.79: [ 2811]: --> HDLC<25:FF C0 C2 04 04 04 04 04 04 04 04 04 
04 EC 1C 0C AC CC 1C 1C 9C 0C 6C C0 86>
Nov 28 19:27:49.79: [ 2811]: --> [2:OK]
Nov 28 19:27:49.79: [ 2811]: REMOTE TSI "6098835087"
Nov 28 19:27:49.79: [ 2811]: <-- [9:AT+FRH=3\r]
Nov 28 19:27:49.80: [ 2811]: --> [7:CONNECT]
Nov 28 19:27:50.09: [ 2811]: --> HDLC<8:FF C8 C1 00 54 1E 60 51>
Nov 28 19:27:50.09: [ 2811]: --> [2:OK]
Nov 28 19:27:50.09: [ 2811]: REMOTE wants 12000 bit/s
Nov 28 19:27:50.09: [ 2811]: REMOTE wants A4 page width (215 mm)
Nov 28 19:27:50.09: [ 2811]: REMOTE wants unlimited page length
Nov 28 19:27:50.09: [ 2811]: REMOTE wants 3.85 line/mm
Nov 28 19:27:50.10: [ 2811]: REMOTE wants 1-D MH
Nov 28 19:27:50.10: [ 2811]: <-- [9:AT+FRH=3\r]
Nov 28 19:27:50.10: [ 2811]: --> [7:CONNECT]
Nov 28 19:27:50.18: [ 2811]: --> [2:  ]
Nov 28 19:27:50.18: [ 2811]: --> [10:NO CARRIER]
Nov 28 19:27:50.18: [ 2811]: RECV training at v.17 12000 bit/s
Nov 28 19:27:50.18: [ 2811]: <-- [11:AT+FRM=121\r]
Nov 28 19:27:54.68: [ 2811]: --> [0:]
Nov 28 19:27:54.68: [ 2811]: MODEM <Empty line>
Nov 28 19:27:54.68: [ 2811]: MODEM TIMEOUT: receiving TCF
Nov 28 19:27:54.68: [ 2811]: <-- data [1]
Nov 28 19:27:54.69: [ 2811]: --> [2:  ]
Nov 28 19:27:54.69: [ 2811]: --> [2:OK]
Nov 28 19:27:54.69: [ 2811]: DELAY 75 ms
Nov 28 19:27:54.77: [ 2811]: <-- [9:AT+FTH=3\r]
Nov 28 19:27:55.73: [ 2811]: --> [7:CONNECT]
Nov 28 19:27:55.73: [ 2811]: <-- HDLC<3:FF C8 22>
Nov 28 19:27:55.73: [ 2811]: <-- data [3]
Nov 28 19:27:55.73: [ 2811]: <-- data [2]
Nov 28 19:27:56.23: [ 2811]: --> [2:OK]
Nov 28 19:27:56.23: [ 2811]: TRAINING failed
Nov 28 19:27:56.23: [ 2811]: <-- [9:AT+FRH=3\r]
Nov 28 19:27:57.55: [ 2811]: --> [7:CONNECT]
Nov 28 19:27:59.47: [ 2811]: --> HDLC<25:FF C0 C2 04 04 04 04 04 04 04 04 04 
04 EC 1C 0C AC CC 1C 1C 9C 0C 6C C0 86>
Nov 28 19:27:59.47: [ 2811]: --> [2:OK]
Nov 28 19:27:59.47: [ 2811]: REMOTE TSI "6098835087"
Nov 28 19:27:59.47: [ 2811]: <-- [9:AT+FRH=3\r]
Nov 28 19:27:59.48: [ 2811]: --> [7:CONNECT]
Nov 28 19:27:59.77: [ 2811]: --> HDLC<8:FF C8 C1 00 64 1E 65 C4>
Nov 28 19:27:59.77: [ 2811]: --> [2:OK]
Nov 28 19:27:59.77: [ 2811]: REMOTE wants 9600 bit/s
Nov 28 19:27:59.77: [ 2811]: REMOTE wants A4 page width (215 mm)
Nov 28 19:27:59.77: [ 2811]: REMOTE wants unlimited page length
Nov 28 19:27:59.77: [ 2811]: REMOTE wants 3.85 line/mm
Nov 28 19:27:59.77: [ 2811]: REMOTE wants 1-D MH
Nov 28 19:27:59.78: [ 2811]: <-- [9:AT+FRH=3\r]
Nov 28 19:27:59.78: [ 2811]: --> [7:CONNECT]
Nov 28 19:27:59.86: [ 2811]: --> [2:  ]
Nov 28 19:27:59.86: [ 2811]: --> [10:NO CARRIER]
Nov 28 19:27:59.86: [ 2811]: RECV training at v.17 9600 bit/s
Nov 28 19:27:59.86: [ 2811]: <-- [10:AT+FRM=97\r]
Nov 28 19:28:04.36: [ 2811]: --> [0:]
Nov 28 19:28:04.36: [ 2811]: MODEM <Empty line>
Nov 28 19:28:04.36: [ 2811]: MODEM TIMEOUT: receiving TCF
Nov 28 19:28:04.36: [ 2811]: <-- data [1]
Nov 28 19:28:04.37: [ 2811]: --> [2:  ]
Nov 28 19:28:04.37: [ 2811]: --> [2:OK]
Nov 28 19:28:04.37: [ 2811]: DELAY 75 ms
Nov 28 19:28:04.45: [ 2811]: <-- [9:AT+FTH=3\r]
Nov 28 19:28:05.41: [ 2811]: --> [7:CONNECT]
Nov 28 19:28:05.41: [ 2811]: <-- HDLC<3:FF C8 22>
Nov 28 19:28:05.41: [ 2811]: <-- data [3]
Nov 28 19:28:05.41: [ 2811]: <-- data [2]
Nov 28 19:28:05.91: [ 2811]: --> [2:OK]
Nov 28 19:28:05.91: [ 2811]: TRAINING failed
Nov 28 19:28:05.91: [ 2811]: <-- [9:AT+FRH=3\r]
Nov 28 19:28:07.01: [ 2811]: --> [7:CONNECT]
Nov 28 19:28:08.93: [ 2811]: --> HDLC<25:FF C0 C2 04 04 04 04 04 04 04 04 04 
04 EC 1C 0C AC CC 1C 1C 9C 0C 6C C0 86>
Nov 28 19:28:08.93: [ 2811]: --> [2:OK]
Nov 28 19:28:08.93: [ 2811]: REMOTE TSI "6098835087"
Nov 28 19:28:08.93: [ 2811]: <-- [9:AT+FRH=3\r]
Nov 28 19:28:08.94: [ 2811]: --> [7:CONNECT]
Nov 28 19:28:09.20: [ 2811]: --> HDLC<8:FF C8 C1 00 64 1E 65 C4>
Nov 28 19:28:09.20: [ 2811]: --> [2:OK]
Nov 28 19:28:09.20: [ 2811]: REMOTE wants 9600 bit/s
Nov 28 19:28:09.20: [ 2811]: REMOTE wants A4 page width (215 mm)
Nov 28 19:28:09.20: [ 2811]: REMOTE wants unlimited page length
Nov 28 19:28:09.20: [ 2811]: REMOTE wants 3.85 line/mm
Nov 28 19:28:09.21: [ 2811]: REMOTE wants 1-D MH
Nov 28 19:28:09.21: [ 2811]: <-- [9:AT+FRH=3\r]
Nov 28 19:28:09.21: [ 2811]: --> [7:CONNECT]
Nov 28 19:28:09.32: [ 2811]: --> [2:  ]
Nov 28 19:28:09.32: [ 2811]: --> [10:NO CARRIER]
Nov 28 19:28:09.32: [ 2811]: RECV training at v.17 9600 bit/s
Nov 28 19:28:09.32: [ 2811]: <-- [10:AT+FRM=97\r]
Nov 28 19:28:13.82: [ 2811]: --> [0:]
Nov 28 19:28:13.82: [ 2811]: MODEM <Empty line>
Nov 28 19:28:13.82: [ 2811]: MODEM TIMEOUT: receiving TCF
Nov 28 19:28:13.82: [ 2811]: <-- data [1]
Nov 28 19:28:13.83: [ 2811]: --> [2:  ]
Nov 28 19:28:13.83: [ 2811]: --> [2:OK]
Nov 28 19:28:13.83: [ 2811]: DELAY 75 ms
Nov 28 19:28:13.91: [ 2811]: <-- [9:AT+FTH=3\r]
Nov 28 19:28:14.87: [ 2811]: --> [7:CONNECT]
Nov 28 19:28:14.87: [ 2811]: <-- HDLC<3:FF C8 22>
Nov 28 19:28:14.87: [ 2811]: <-- data [3]
Nov 28 19:28:14.87: [ 2811]: <-- data [2]
Nov 28 19:28:15.37: [ 2811]: --> [2:OK]
Nov 28 19:28:15.37: [ 2811]: TRAINING failed
Nov 28 19:28:15.37: [ 2811]: <-- [9:AT+FRH=3\r]
Nov 28 19:28:16.69: [ 2811]: --> [7:CONNECT]
Nov 28 19:28:18.61: [ 2811]: --> HDLC<25:FF C0 C2 04 04 04 04 04 04 04 04 04 
04 EC 1C 0C AC CC 1C 1C 9C 0C 6C C0 86>
Nov 28 19:28:18.61: [ 2811]: --> [2:OK]
Nov 28 19:28:18.61: [ 2811]: REMOTE TSI "6098835087"
Nov 28 19:28:18.61: [ 2811]: <-- [9:AT+FRH=3\r]
Nov 28 19:28:18.62: [ 2811]: --> [7:CONNECT]
Nov 28 19:28:18.88: [ 2811]: --> HDLC<8:FF C8 C1 00 74 1E 66 B7>
Nov 28 19:28:18.88: [ 2811]: --> [2:OK]
Nov 28 19:28:18.88: [ 2811]: REMOTE wants 7200 bit/s
Nov 28 19:28:18.88: [ 2811]: REMOTE wants A4 page width (215 mm)
Nov 28 19:28:18.88: [ 2811]: REMOTE wants unlimited page length
Nov 28 19:28:18.88: [ 2811]: REMOTE wants 3.85 line/mm
Nov 28 19:28:18.89: [ 2811]: REMOTE wants 1-D MH
Nov 28 19:28:18.89: [ 2811]: <-- [9:AT+FRH=3\r]
Nov 28 19:28:18.89: [ 2811]: --> [7:CONNECT]
Nov 28 19:28:19.00: [ 2811]: --> [2:  ]
Nov 28 19:28:19.00: [ 2811]: --> [10:NO CARRIER]
Nov 28 19:28:19.00: [ 2811]: RECV training at v.17 7200 bit/s
Nov 28 19:28:19.00: [ 2811]: <-- [10:AT+FRM=73\r]
Nov 28 19:28:23.50: [ 2811]: --> [0:]
Nov 28 19:28:23.50: [ 2811]: MODEM <Empty line>
Nov 28 19:28:23.50: [ 2811]: MODEM TIMEOUT: receiving TCF
Nov 28 19:28:23.50: [ 2811]: <-- data [1]
Nov 28 19:28:23.51: [ 2811]: --> [2:  ]
Nov 28 19:28:23.51: [ 2811]: --> [2:OK]
Nov 28 19:28:23.51: [ 2811]: DELAY 75 ms
Nov 28 19:28:23.59: [ 2811]: <-- [9:AT+FTH=3\r]
Nov 28 19:28:24.55: [ 2811]: --> [7:CONNECT]
Nov 28 19:28:24.55: [ 2811]: <-- HDLC<3:FF C8 22>
Nov 28 19:28:24.55: [ 2811]: <-- data [3]
Nov 28 19:28:24.55: [ 2811]: <-- data [2]
Nov 28 19:28:25.05: [ 2811]: --> [2:OK]
Nov 28 19:28:25.05: [ 2811]: TRAINING failed
Nov 28 19:28:25.05: [ 2811]: <-- [9:AT+FRH=3\r]
Nov 28 19:28:26.14: [ 2811]: --> [7:CONNECT]
Nov 28 19:28:28.06: [ 2811]: --> HDLC<25:FF C0 C2 04 04 04 04 04 04 04 04 04 
04 EC 1C 0C AC CC 1C 1C 9C 0C 6C C0 86>
Nov 28 19:28:28.06: [ 2811]: --> [2:OK]
Nov 28 19:28:28.06: [ 2811]: REMOTE TSI "6098835087"
Nov 28 19:28:28.06: [ 2811]: <-- [9:AT+FRH=3\r]
Nov 28 19:28:28.07: [ 2811]: --> [7:CONNECT]
Nov 28 19:28:28.36: [ 2811]: --> HDLC<8:FF C8 C1 00 74 1E 66 B7>
Nov 28 19:28:28.36: [ 2811]: --> [2:OK]
Nov 28 19:28:28.36: [ 2811]: REMOTE wants 7200 bit/s
Nov 28 19:28:28.36: [ 2811]: REMOTE wants A4 page width (215 mm)
Nov 28 19:28:28.36: [ 2811]: REMOTE wants unlimited page length
Nov 28 19:28:28.36: [ 2811]: REMOTE wants 3.85 line/mm
Nov 28 19:28:28.37: [ 2811]: REMOTE wants 1-D MH
Nov 28 19:28:28.37: [ 2811]: <-- [9:AT+FRH=3\r]
Nov 28 19:28:28.37: [ 2811]: --> [7:CONNECT]
Nov 28 19:28:28.45: [ 2811]: --> [2:  ]
Nov 28 19:28:28.45: [ 2811]: --> [10:NO CARRIER]
Nov 28 19:28:28.45: [ 2811]: RECV training at v.17 7200 bit/s
Nov 28 19:28:28.45: [ 2811]: <-- [10:AT+FRM=73\r]
Nov 28 19:28:32.95: [ 2811]: --> [0:]
Nov 28 19:28:32.95: [ 2811]: MODEM <Empty line>
Nov 28 19:28:32.95: [ 2811]: MODEM TIMEOUT: receiving TCF
Nov 28 19:28:32.95: [ 2811]: <-- data [1]
Nov 28 19:28:32.96: [ 2811]: --> [2:  ]
Nov 28 19:28:32.96: [ 2811]: --> [2:OK]
Nov 28 19:28:32.96: [ 2811]: DELAY 75 ms
Nov 28 19:28:33.04: [ 2811]: <-- [9:AT+FTH=3\r]
Nov 28 19:28:34.00: [ 2811]: --> [7:CONNECT]
Nov 28 19:28:34.00: [ 2811]: <-- HDLC<3:FF C8 22>
Nov 28 19:28:34.00: [ 2811]: <-- data [3]
Nov 28 19:28:34.00: [ 2811]: <-- data [2]
Nov 28 19:28:34.50: [ 2811]: --> [2:OK]
Nov 28 19:28:34.50: [ 2811]: TRAINING failed
Nov 28 19:28:34.50: [ 2811]: <-- [9:AT+FRH=3\r]
Nov 28 19:28:35.80: [ 2811]: --> [7:CONNECT]
Nov 28 19:28:37.72: [ 2811]: --> HDLC<25:FF C0 C2 04 04 04 04 04 04 04 04 04 
04 EC 1C 0C AC CC 1C 1C 9C 0C 6C C0 86>
Nov 28 19:28:37.72: [ 2811]: --> [2:OK]
Nov 28 19:28:37.72: [ 2811]: REMOTE TSI "6098835087"
Nov 28 19:28:37.72: [ 2811]: <-- [9:AT+FRH=3\r]
Nov 28 19:28:37.73: [ 2811]: --> [7:CONNECT]
Nov 28 19:28:38.02: [ 2811]: --> HDLC<8:FF C8 C1 00 50 1E AC 95>
Nov 28 19:28:38.02: [ 2811]: --> [2:OK]
Nov 28 19:28:38.02: [ 2811]: REMOTE wants 4800 bit/s
Nov 28 19:28:38.02: [ 2811]: REMOTE wants A4 page width (215 mm)
Nov 28 19:28:38.02: [ 2811]: REMOTE wants unlimited page length
Nov 28 19:28:38.02: [ 2811]: REMOTE wants 3.85 line/mm
Nov 28 19:28:38.03: [ 2811]: REMOTE wants 1-D MH
Nov 28 19:28:38.03: [ 2811]: <-- [9:AT+FRH=3\r]
Nov 28 19:28:38.03: [ 2811]: --> [7:CONNECT]
Nov 28 19:28:38.11: [ 2811]: --> [2:  ]
Nov 28 19:28:38.11: [ 2811]: --> [10:NO CARRIER]
Nov 28 19:28:38.11: [ 2811]: RECV training at v.27ter 4800 bit/s
Nov 28 19:28:38.11: [ 2811]: <-- [10:AT+FRM=48\r]
Nov 28 19:28:39.11: [ 2811]: --> [7:CONNECT]
Nov 28 19:28:40.72: [ 2811]: RECV: TCF 960 bytes, 2% non-zero, 911 zero-run
Nov 28 19:28:40.72: [ 2811]: --> [10:NO CARRIER]
Nov 28 19:28:40.72: [ 2811]: DELAY 75 ms
Nov 28 19:28:40.80: [ 2811]: TRAINING succeeded
Nov 28 19:28:40.80: [ 2811]: <-- [9:AT+FTH=3\r]
Nov 28 19:28:41.76: [ 2811]: --> [7:CONNECT]
Nov 28 19:28:41.76: [ 2811]: <-- HDLC<3:FF C8 21>
Nov 28 19:28:41.76: [ 2811]: <-- data [3]
Nov 28 19:28:41.76: [ 2811]: <-- data [2]
Nov 28 19:28:42.26: [ 2811]: --> [2:OK]
Nov 28 19:28:42.26: [ 2811]: MODEM input buffering enabled
Nov 28 19:28:42.26: [ 2811]: <-- [10:AT+FRM=48\r]
Nov 28 19:28:44.34: [ 2811]: --> [7:CONNECT]
Nov 28 19:28:44.34: [ 2811]: RECV: begin page
Nov 28 19:29:28.61: [ 2811]: RECV: 1092 total lines, 1 bad lines, 1 
consecutive bad lines
Nov 28 19:29:28.62: [ 2811]: RECV: end page
Nov 28 19:29:28.62: [ 2811]: --> [10:NO CARRIER]
Nov 28 19:29:28.62: [ 2811]: <-- [9:AT+FRH=3\r]
Nov 28 19:29:28.76: [ 2811]: --> [7:CONNECT]
Nov 28 19:29:29.95: [ 2811]: --> HDLC<5:FF C8 F2 AC A0>
Nov 28 19:29:29.95: [ 2811]: --> [2:OK]
Nov 28 19:29:29.95: [ 2811]: RECV recv MPS (more pages, same document)
Nov 28 19:29:29.95: [ 2811]: <-- [9:AT+FRS=7\r]
Nov 28 19:29:30.13: [ 2811]: --> [2:OK]
Nov 28 19:29:30.13: [ 2811]: <-- [9:AT+FTH=3\r]
Nov 28 19:29:31.19: [ 2811]: --> [7:CONNECT]
Nov 28 19:29:31.19: [ 2811]: RECV send MCF (message confirmation)
Nov 28 19:29:31.20: [ 2811]: RECV FAX (000000092): from 6098835087, page 1 in 
0:51, INF, 3.85 line/mm, 1-D MH, 4800 bit/s
Nov 28 19:29:31.20: [ 2811]: <-- HDLC<3:FF C8 31>
Nov 28 19:29:31.20: [ 2811]: <-- data [3]
Nov 28 19:29:31.20: [ 2811]: <-- data [2]
Nov 28 19:29:31.79: [ 2811]: --> [2:OK]
Nov 28 19:29:31.79: [ 2811]: MODEM input buffering enabled
Nov 28 19:29:31.79: [ 2811]: <-- [10:AT+FRM=48\r]
Nov 28 19:29:34.59: [ 2811]: --> [7:CONNECT]
Nov 28 19:29:34.59: [ 2811]: RECV: begin page
Nov 28 19:30:14.50: [ 2811]: RECV: 1090 total lines, 1 bad lines, 1 
consecutive bad lines
Nov 28 19:30:14.50: [ 2811]: RECV: end page
Nov 28 19:30:14.50: [ 2811]: --> [10:NO CARRIER]
Nov 28 19:30:14.51: [ 2811]: <-- [9:AT+FRH=3\r]
Nov 28 19:30:14.65: [ 2811]: --> [7:CONNECT]
Nov 28 19:30:15.84: [ 2811]: --> HDLC<5:FF C8 F4 CC 66>
Nov 28 19:30:15.84: [ 2811]: --> [2:OK]
Nov 28 19:30:15.84: [ 2811]: RECV recv EOP (no more pages or documents)
Nov 28 19:30:15.84: [ 2811]: <-- [9:AT+FRS=7\r]
Nov 28 19:30:16.02: [ 2811]: --> [2:OK]
Nov 28 19:30:16.02: [ 2811]: <-- [9:AT+FTH=3\r]
Nov 28 19:30:17.08: [ 2811]: --> [7:CONNECT]
Nov 28 19:30:17.08: [ 2811]: <-- HDLC<3:FF C8 31>
Nov 28 19:30:17.08: [ 2811]: <-- data [3]
Nov 28 19:30:17.08: [ 2811]: <-- data [2]
Nov 28 19:30:17.68: [ 2811]: --> [2:OK]
Nov 28 19:30:17.68: [ 2811]: RECV send MCF (message confirmation)
Nov 28 19:30:17.69: [ 2811]: RECV FAX (000000092): from 6098835087, page 2 in 
0:46, INF, 3.85 line/mm, 1-D MH, 4800 bit/s
Nov 28 19:30:17.69: [ 2811]: RECV FAX (000000092): recvq/fax000000134.tif from 
6098835087, route to <unspecified>, 2 pages in 3:19
Nov 28 19:30:17.69: [ 2811]: <-- [9:AT+FRH=3\r]
Nov 28 19:30:18.39: [ 2811]: --> [7:CONNECT]
Nov 28 19:30:19.77: [ 2811]: --> HDLC<5:FF C8 DF 59 6F>
Nov 28 19:30:19.77: [ 2811]: --> [2:OK]
Nov 28 19:30:19.77: [ 2811]: MODEM input buffering enabled
Nov 28 19:30:19.78: [ 2811]: RECV FAX: bin/faxrcvd "recvq/fax000000134.tif" 
"ttyS4" "000000092" "" "" ""
Nov 28 19:30:19.82: [ 2811]: RECV FAX: end
Nov 28 19:30:19.82: [ 2811]: SESSION END



____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*