Re: [hylafax-users] Incomplete Fax Reception

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

On 2004.11.29 13:07 George Bell wrote:
> The sender: A standalone fax machine Panasonic KX-FP121 from Staples,
> about 5
>                   yr old.
>
> The receiver: Hylafax 4.2.0 from source, SuSE 8.0 Kernel 2.4.18 in
> class 1,
>                     Multitech 5634ZPX-PCI

> Nov 28 19:26:53.93: [ 2811]: SESSION BEGIN 000000092 15713210207
> Nov 28 19:26:53.93: [ 2811]: HylaFAX (tm) Version 4.2.0
> Nov 28 19:26:53.93: [ 2811]: <-- [4:ATA\r]
> Nov 28 19:26:58.21: [ 2811]: --> [3:FAX]
> Nov 28 19:26:58.21: [ 2811]: ANSWER: FAX CONNECTION  DEVICE
> '/dev/ttyS4'
> Nov 28 19:26:58.21: [ 2811]: MODEM input buffering enabled
> Nov 28 19:26:58.22: [ 2811]: RECV FAX: begin
> Nov 28 19:26:58.22: [ 2811]: MODEM input buffering disabled
> Nov 28 19:26:58.22: [ 2811]: <-- HDLC<32:FF C0 04 AD 00 55 12 9E 36 86
> 62 82
> 1A 04 14 2E B6 94 04 6A A6 4E CE 96 F6 76 04 2C 74 4C 74 0C>
> Nov 28 19:26:58.22: [ 2811]: <-- data [32]
> Nov 28 19:26:58.22: [ 2811]: <-- data [2]
> Nov 28 19:26:58.22: [ 2811]: --> [3:FAX]

You're using adaptive answer?  Is this intentional?

Anyway, notice that you get two FAX responses from the modem.  That's 
causing problems for one thing.

> Nov 28 19:27:21.53: [ 2811]: REMOTE wants 14400 bit/s
> Nov 28 19:27:21.53: [ 2811]: REMOTE wants A4 page width (215 mm)
> Nov 28 19:27:21.53: [ 2811]: REMOTE wants unlimited page length
> Nov 28 19:27:21.54: [ 2811]: REMOTE wants 3.85 line/mm
> Nov 28 19:27:21.54: [ 2811]: REMOTE wants 1-D MH
> Nov 28 19:27:21.54: [ 2811]: <-- [9:AT+FRH=3\r]
> Nov 28 19:27:21.54: [ 2811]: --> [7:CONNECT]
> Nov 28 19:27:21.64: [ 2811]: --> [2:  ]
> Nov 28 19:27:21.64: [ 2811]: --> [10:NO CARRIER]
> Nov 28 19:27:21.64: [ 2811]: RECV training at v.17 14400 bit/s
> Nov 28 19:27:21.64: [ 2811]: <-- [11:AT+FRM=145\r]
> Nov 28 19:27:26.14: [ 2811]: --> [0:]

You probably want to disable Class1TCFRecvHack in your modem config.

Lee.

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*