Re: [hylafax-users] Rockwell modem cards in Lucent TNT

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

On 2004.08.24 23:40 Tracy R Reed wrote:
> On Tue, Aug 24, 2004 at 04:57:10PM -0700, Lee Howard spake thusly:
> > Can you fax to yourself?  (Send a fax out one port and into
> another?)
>
> I have been trying all evening to implement this suggestion with no
> luck
> because if we set up the call routes to route back to itself it
> considers
> it a loop and has an error. We will be going on-site physically on
> Thursday and may try a patch cable to take it out of the TNT and back
> in.
> Doing everything digitally does make some simple things more
> complicated.

Mostly I'm interested in seeing some debugging from the receiver, and 
since the receiver you've tried doesn't really produce any useful 
information, it would be most helpful if you could send to a HylaFAX 
receiver and I could see the receiver's logs also.  But it doesn't 
necessarily have to be a loop, I just thought that maybe that would be 
easiest.

> > This is the point where I would start recommending to test another
> > modem type on the same line, to the same destination connected to
> the
> > same server.
>
> Testing another modem type on the same line is a bit of a problem
> because
> we have a DS-3 connected directly into the TNT and everything is
> handled
> digitally. It's not like we are plugging a PC card faxmodem into a
> POTS
> line.

Interesting.  I had assumed, since they were Rockwell chipsets, that 
they were analog.  My mistake.

Lee.

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*