Re: [hylafax-users] Rockwell modem cards in Lucent TNT

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

On 2004.08.22 23:40 Tracy R Reed wrote:

> I originally ran faxaddmodem on it and it configured it as a class 1
> fax
> by default but it never worked very well.  It will not connect to
> several
> fax machines I need to send to, fails to negotiate (train) a
> particular
> speed with others, etc. I have tried it as a class 2 fax and then it
> would
> connect to some of the faxes it could not connect to before and
> transmit a
> fax seemingly successfully but hylafax would still end the
> transmission
> with an error "Unspecified Transmit Phase C error". I have tried using
> the
> rockwell chipset configs that come with hylafax and when calling as a
> class 1 fax it often fails to negotiate a connection ending with
> "Failure
> to train remote modem at 2400 bps or minimum speed; too many attempts
> to
> dial" and when calling another modem a common failure is "Unable to
> set
> session parameters; too many attempts to dial". So my config is
> clearly
> screwy.
....
> Aug 15 23:04:25 lnx FaxGetty[30560]: MODEM V5.8175 RL56CSM/3 CHANNEL:2
> Rockwell ARM CSM/
>
> So I figure the last line has all of the chipset/model information.
> Does
> anyone have a working config for this or any suggestions on what I
> should
> try?

Send some session logs that indicate the problems.  Since you have a 
connection to the modem and can communicate with it via AT commands I 
think that, for the moment, we can ignore all of the complexity of the 
setup and focus on the faxing problems in Class 1.

Lee.

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*