Re: [hylafax-users] T.30 T2 timeout errors

["Steve Melo" <smelo@xxxxxxxxxxxxxxxxx>]

Lee,

Thank you again for all of your time and help!  For about 24 hours I have
not received any T.30 T2 timeout errors but I will do some more testing
today and perhaps till the end of the week at which time I will report back
with my results.

Regarding your modem recommendation, you mentioned the MultiTech
MT5634ZBA-V92 as a good single line solution, what I should have mentioned
is that in my configuration I use 3 modems, 2 of which are dedicated to
hylafax and the other is used for some data transmissions.  I didn't mention
the extra modems earlier because I didn't think it was relevant to my
problem.  Also I was not even aware that a single modem could handle
multiple lines.  Given this new information can I ask you to please
recommend a multiline modem?

Also, I checked the manpage for Class1SwitchingCmd and in fact it was there.
My confusion was because I was referring to the online manpage at
http://www.hylafax.org/man/hylafax-config.php where it is not mentioned.

Thanks again!

steve melo



----- Original Message -----
From: "Lee Howard" <faxguy@xxxxxxxxxxxxxxxx>
To: "Steve Melo" <smelo@xxxxxxxxxxxxxxxxx>
Cc: <hylafax-users@xxxxxxxxxxx>
Sent: Monday, July 12, 2004 6:08 PM
Subject: Re: [hylafax-users] T.30 T2 timeout errors


> On 2004.07.12 14:50 Steve Melo wrote:
> > Lee,
> >
> > I do not see the "Class1SwitchingCmd" option in the hylafax config
> > documentation, is this new with 1.4.8?
>
> It was new for 4.1.3.  See 'man hylafax-config'.  Is it not there?
>
> > I put the line: "Class1SwitchingCmd: <delay:7>" exactly as you typed
> > it into
> > my "config.ttyS1" config file including the "<" and ">" symbols, is
> > this
> > correct?
>
> Yes.
>
> > You also mentioned that this is a common problem with the USR modem.
> > Would
> > you be able to recomend something better?
>
> For single-line analog modems I would recommend the MT5634ZBA-V92 for
> externals and the MT5634ZPX-PCI-V92 for internals.  Update the firmware
> and run them in Class 1.0 with HylaFAX 4.2.0 or Class 2.1 with 4.1.8.
>
> Lee.
>


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*