Re: [hylafax-users] T.30 T2 timeout errors

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

On 2004.07.13 07:06 Steve Melo wrote:

> Thank you again for all of your time and help!  For about 24 hours I
> have
> not received any T.30 T2 timeout errors but I will do some more
> testing
> today and perhaps till the end of the week at which time I will report
> back
> with my results.

Thanks.

> Regarding your modem recommendation, you mentioned the MultiTech
> MT5634ZBA-V92 as a good single line solution, what I should have
> mentioned
> is that in my configuration I use 3 modems, 2 of which are dedicated
> to
> hylafax and the other is used for some data transmissions.  I didn't
> mention
> the extra modems earlier because I didn't think it was relevant to my
> problem.  Also I was not even aware that a single modem could handle
> multiple lines.  Given this new information can I ask you to please
> recommend a multiline modem?

MultiTech makes an ISI5634PCI 4-port modem and MainPine makes a 
RockForceQUATRO+; both would seem to suit your needs.  If those are too 
expensive for your taste, you can usually pick up Comtrol RocketModem 
II cards (4/6/8-port) from eBay at relatively inexpensive prices.  (The 
RocketModem I's are ISA, and you may not have an ISA slot, and the 
RocketModem IIIs have fax problems, so stick to the II's.)

> Also, I checked the manpage for Class1SwitchingCmd and in fact it was
> there.
> My confusion was because I was referring to the online manpage at
> http://www.hylafax.org/man/hylafax-config.php where it is not
> mentioned.

Yes, the web site is due for an update.

Lee.

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*