HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] T.30 T2 timeout errors



On 2004.07.12 14:50 Steve Melo wrote:
Lee,

I do not see the "Class1SwitchingCmd" option in the hylafax config
documentation, is this new with 1.4.8?

It was new for 4.1.3. See 'man hylafax-config'. Is it not there?


I put the line: "Class1SwitchingCmd: <delay:7>" exactly as you typed
it into
my "config.ttyS1" config file including the "<" and ">" symbols, is
this
correct?

Yes.


You also mentioned that this is a common problem with the USR modem.
Would
you be able to recomend something better?

For single-line analog modems I would recommend the MT5634ZBA-V92 for externals and the MT5634ZPX-PCI-V92 for internals. Update the firmware and run them in Class 1.0 with HylaFAX 4.2.0 or Class 2.1 with 4.1.8.


Lee.

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*




Project hosted by iFAX Solutions