Re: [hylafax-users] MODEM Command error

["Robert A.Pickering Jr." <rpickering@xxxxxxxxxxx>]

I have the same modem.
Setting it as Class 1 didn't help...

However, you can run faxgetty regardless of whether or not you're in a 
send-only environment.
In fact, the manuals and FAQs recommend running it, to prevent the 
exact problem you've described.

I'd first try running faxgetty and see if it solves the issue for you.

Then I'd get a new modem.  :)

-Rob

--
Robert A. Pickering Jr.                                                 
        ProScan Imaging
Sr. Network & Security Engineer
On Jul 8, 2004, at 11:50 AM, Clinton Bosch wrote:

> Hi Sebastian
>
> Faxgetty is not running as I am using a send only setup.
>
> I have been browsing through the archives, and I have seen some of the
> solutions given to errors that I am getting are to setup the modem as a
> class1 modem. I have set up my 'U.S. ROBOTICS 56K FAX EXT REV. 11.11.13
>  5601' modem as a class 2.0, could this have anything to do with it....
> If I run cu -l ttyS0 and then at+fclass=?
> I get 0,1,2.0 ??? so I just assumed that 2.0 would be fine, what is 
> best?
>
> Sebastian Flothow wrote:
>
> > Am 7. Jul 2004 um 16:28 Uhr schrieb Clinton Bosch:
> >
> >> And from then on ALL subsequent faxes fail with the same error. I
> >> have found that by running the command, it seems to come right 
> again:
> >> /usr/local/sbin/faxmodem -c '(0,1),(0-5),(0-2),(0-2),0,0,0,(0-7)' 
> ttyS0
> >>
> >> But why do I need to "Remind" hylafax about its modem all the 
> time???
> >
> >
> > Is faxgetty running? It should monitor the modem for any interesting
>  > events and notify the main (queueing) daemon.
> >
> >
> > Sebastian
> >
>
> --
> Clinton Bosch - Hemisphere Technologies
> JDO Genie - High performance JDO for JDBC
> http://www.hemtech.co.za
> Tel +27 21 670 3940 - Fax +27 21 670 3979
> Cell +27 82 805 9479
>
>
>
> ____________________ HylaFAX(tm) Users Mailing List 
> _______________________
>   To subscribe/unsubscribe, click 
> http://lists.hylafax.org/cgi-bin/lsg2.cgi
>  On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < 
> /dev/null
>   *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*