Re: [hylafax-users] ISDN modem usage HOWTO required.

["Georgy Goshin" <gosha@xxxxxxxx>]

Hi,

So I can use it is one-line standart modem only? It is not very good, but it
is enught for the first time, when amount of incoming faxes will not very
large. Can you advice another modem, terminal adapter or somewhat else that
will work with all available lines (S0 version, not PRI) and pass to Hylafax
the DID information. As I can see that all models that commonly known that
they pass DID infromatin (this is Zyxel Elite and USR Courier) are emulates
standart serial modem...




Thanks,
Georgy

> > 1. My first question is where to get an info about usage of USR
> > Courier I-Modem with linux in common and with Hylafax?
>
> Since it emulates an analog modem, you should be able to use it like
> one. Just follow the instructions for adding a modem to Hylafax.
>
> According to the USR website, it supports Class 1 and Class 2.0; I'd
> recommend using Class 1.
>
>
> > 2. Now modem answers only on ttyS1, but I would like to use 2
> > simultaneous connections. Maybe I need to load any drivers for USR
> > Courier I-Modem that will emulate 2 analog modems? Or maybe there is
> > some other way to connect ISDN modem with Hylafax?
>
> This is usually not possible with these things - it's the downside of
> emulating an analog modem.
> In general, they are targeted at average dial-up users with an
> occasional fax to send. For reliable, higher-volume faxing, I'd
> recommend a serious ISDN card (i.e., an active one, where the ISDN
> protocol handling is done in the firmware.)
>
>
> > 3. FaxDispatch file contais two method of routing: by device and by
> > CID, is CID the destination number or it is just caller ID?
>
> There are more possibilities; see man faxrcvd.
>
>
> Gru?
> Sebastian
>
> -- 
> Sebastian Flothow
> sebastian@xxxxxxxxxx
>
> Because it reverses the logical flow of conversation.
>  > Why is top posting frowned upon?
>
>


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*