Re: [hylafax-users] phase D error when receiving faxes

[Pedro Rocadas <procadas@xxxxxxxxx>]

You have this one too

http://www.hylafax.org/archive/2003-10/msg00133.php

Cheers

Mailling list is your friend :-)


--- "Mirza, Farhan" <fmirza@xxxxxxxxxxxx> wrote:
>  
> 
> Can any one help me regarding this?
> 
>   _____  
> 
> From: Mirza, Farhan 
> Sent: Tuesday, June 01, 2004 4:58 PM
> To: hylafax-users@xxxxxxxxxxx
> Subject: [hylafax-users] phase D error when
> receiving faxes
> 
>  
> 
> Hi,
> 
> I am receiving intermittent phase D errors when
> receiving faxes. 
> 
>  
> 
> Jun 01 15:55:13.32: [18469]: <-- [7:AT+FDR\r]
> 
> Jun 01 15:55:13.41: [18469]: --> [10:+FHNG: 100]
> 
> Jun 01 15:55:13.41: [18469]: REMOTE HANGUP:
> Unspecified Phase D error
> (code 100)
> 
>  
> 
> I am using hylafax-4.1.8 on Red Hat 9 with Eicon
> Diva t1/pri card. Any
> ideas how to resolve those errors?
> 
> This is what I see in the logs:
> 
>  
> 
> Jun 01 15:52:45.51: [18469]: HylaFAX (tm) Version
> 4.1.8
> 
> Jun 01 15:52:45.51: [18469]: <-- [4:ATA\r]
> 
> Jun 01 15:52:45.51: [18469]: --> [5:CID: ]
> 
> Jun 01 15:52:45.51: [18469]: --> [9:DAD: 5111]
> 
> Jun 01 15:52:45.51: [18469]: --> [4:RING]
> 
> Jun 01 15:53:14.32: [18469]: --> [5:+FCON]
> 
> Jun 01 15:53:14.32: [18469]: ANSWER: FAX CONNECTION 
> DEVICE
> '/dev/ttyds01'
> 
> Jun 01 15:53:14.32: [18469]: RECV FAX: begin
> 
> Jun 01 15:53:14.32: [18469]: --> [26:+FTSI:      
> 5222
> 
> Jun 01 15:53:14.32: [18469]: REMOTE TSI "5222"
> 
> Jun 01 15:53:14.32: [18469]: --> [22:+FDCS:
> 1,1,0,2,0,2,0,0]
> 
> Jun 01 15:53:14.32: [18469]: REMOTE wants 4800 bit/s
> 
> Jun 01 15:53:14.32: [18469]: REMOTE wants page width
> 1728 pixels in 215
> mm
> 
> Jun 01 15:53:14.32: [18469]: REMOTE wants unlimited
> page length
> 
> Jun 01 15:53:14.32: [18469]: REMOTE wants 7.7
> line/mm
> 
> Jun 01 15:53:14.32: [18469]: REMOTE wants 1-D MR
> 
> Jun 01 15:53:14.32: [18469]: REMOTE wants T.30 Annex
> C, half duplex ECM
> 
> Jun 01 15:53:14.32: [18469]: --> [2:OK]
> 
> Jun 01 15:53:14.32: [18469]: <-- [7:AT+FDR\r]
> 
> Jun 01 15:53:14.42: [18469]: --> [5:+FCFR]
> 
> Jun 01 15:53:14.42: [18469]: --> [22:+FDCS:
> 1,1,0,2,0,2,0,0]
> 
> Jun 01 15:53:14.42: [18469]: REMOTE wants 4800 bit/s
> 
> Jun 01 15:53:14.42: [18469]: REMOTE wants page width
> 1728 pixels in 215
> mm
> 
> Jun 01 15:53:14.42: [18469]: REMOTE wants unlimited
> page length
> 
> Jun 01 15:53:14.42: [18469]: REMOTE wants 7.7
> line/mm
> 
> Jun 01 15:53:14.42: [18469]: REMOTE wants 1-D MR
> 
> Jun 01 15:53:14.42: [18469]: REMOTE wants T.30 Annex
> C, half duplex ECM
> 
> Jun 01 15:53:14.42: [18469]: --> [7:CONNECT]
> 
> Jun 01 15:53:14.42: [18469]: RECV: begin page
> 
> Jun 01 15:53:14.42: [18469]: RECV: send trigger 022
> 
> Jun 01 15:53:14.42: [18469]: <-- data [1]
> 
> Jun 01 15:55:13.32: [18469]: RECV: 1066 total lines,
> 0 bad lines, 0
> consecutive bad lines
> 
> Jun 01 15:55:13.32: [18469]: --> [13:+FPTS: 2,1067]
> 
> Jun 01 15:55:13.32: [18469]: --> [7:+FET: 2]
> 
> Jun 01 15:55:13.32: [18469]: RECV recv EOP (no more
> pages or documents)
> 
> Jun 01 15:55:13.32: [18469]: --> [2:OK]
> 
> Jun 01 15:55:13.32: [18469]: RECV send MCF (message
> confirmation)
> 
> Jun 01 15:55:13.32: [18469]: RECV FAX (00000177):
> from 5222, page 1 in
> 1:59, INF, 7.7 line/mm, 1-D MR, 4800 bit/s
> 
> Jun 01 15:55:13.32: [18469]: RECV FAX (00000177):
> recvq/fax00092.tif
> from  5222, route to <unspecified>, 1 pages in 1:59
> 
> Jun 01 15:55:13.32: [18469]: <-- [7:AT+FDR\r]
> 
> Jun 01 15:55:13.41: [18469]: --> [10:+FHNG: 100]
> 
> Jun 01 15:55:13.41: [18469]: REMOTE HANGUP:
> Unspecified Phase D error
> (code 100)
> 
> Jun 01 15:55:13.41: [18469]: RECV FAX: bin/faxrcvd
> "recvq/fax00092.tif"
> "ttyds01" "00000177" "" "" ""
> 
> Jun 01 15:55:13.94: [18469]: RECV FAX: end
> 
> Jun 01 15:55:13.94: [18469]: SESSION END
> 
>  
> 
> Here's my config.tty file
> 
>  
> 
> ModemType:  Class2
> 
> ModemRate:  19200 
> 
> ModemFlowControl: rtscts
> 
> ModemNoFlowCmd:  AT&K0
> 
> ModemSoftFlowCmd: AT&K4
> 
> ModemHardFlowCmd: AT&K3
> 
> ModemResetCmds:  AT#CID=14 
> 
> Class2RecvDataTrigger:  "\022"          
> 
> Class2APQueryCmd: none
> 
> Class2SPLCmd:   none
> 
> Class2TBCCmd:   none
> 
>  
> 
> Thanks for any help.
> 
> Farhan
> 
> 



	
		
__________________________________
Do you Yahoo!?
Friends.  Fun.  Try the all-new Yahoo! Messenger.
http://messenger.yahoo.com/ 

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*