 HylaFAX The world's
most advanced open source fax server
|
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]
Re: [hylafax-users] AT+FDT -> FHS:25 (DCS) errors
- To: "'Giulio Orsero'" <giulioo@xxxxxxxxx>, hylafax-users@xxxxxxxxxxx
- Subject: Re: [hylafax-users] AT+FDT -> FHS:25 (DCS) errors
- From: Steve Tuckner <STUCKNER@xxxxxxxxxxxxx>
- Reply-to: Steve Tuckner <sat@xxxxxxxxxxxxx>
- Date: Tue, 13 Apr 2004 09:22:39 -0500
What is the phone number for this fax machine. I would like to try it. Obviously 0,0123456789 is not the correct phone number. Steve Tuckner Multi-Tech Systems > -----Original Message----- > From: hylafax-users-bounce@xxxxxxxxxxx > [mailto:hylafax-users-bounce@xxxxxxxxxxx]On Behalf Of Giulio Orsero > Sent: Tuesday, April 13, 2004 4:41 AM > To: hylafax-users@xxxxxxxxxxx > Subject: [hylafax-users] AT+FDT -> FHS:25 (DCS) errors > > > HylaFAX-4.1.7, MT5634ZBA-V92 fw1.28c (latest) used in class-2.1 > > There is a particular remote fax machine (don't know make/model) which > always causes DCS problems, as you can see in attached log. > Do you think > upgrading HylaFAX could help or this is a kind of > incompatibility between > modem firmware and remote machine which is unsolvable, but > for using it in > class1? > > Thanks > > Mar 22 14:24:27.14: [25656]: SESSION BEGIN 00065987 390123456789 > Mar 22 14:24:27.14: [25656]: HylaFAX (tm) Version 4.1.7 > Mar 22 14:24:27.14: [25656]: SEND FAX: JOB 16160 DEST > 0123456789 COMMID 00065987 DEVICE '/dev/ttyS1' > Mar 22 14:24:27.14: [25656]: DELAY 75 ms > Mar 22 14:24:27.22: [25656]: DELAY 2600 ms > Mar 22 14:24:30.83: [25656]: DELAY 10 ms > Mar 22 14:24:30.84: [25656]: <-- [4:ATZ\r] > Mar 22 14:24:32.11: [25656]: --> [2:OK] > Mar 22 14:24:32.11: [25656]: DELAY 3000 ms > Mar 22 14:24:35.11: [25656]: <-- [5:ATX3\r] > Mar 22 14:24:35.12: [25656]: --> [4:ATX3] > Mar 22 14:24:35.12: [25656]: --> [2:OK] > Mar 22 14:24:35.12: [25656]: <-- [5:ATE0\r] > Mar 22 14:24:35.13: [25656]: --> [4:ATE0] > Mar 22 14:24:35.13: [25656]: --> [2:OK] > Mar 22 14:24:35.13: [25656]: <-- [5:ATV1\r] > Mar 22 14:24:35.14: [25656]: --> [2:OK] > Mar 22 14:24:35.14: [25656]: <-- [5:ATQ0\r] > Mar 22 14:24:35.15: [25656]: --> [2:OK] > Mar 22 14:24:35.15: [25656]: <-- [7:ATS0=0\r] > Mar 22 14:24:35.16: [25656]: --> [2:OK] > Mar 22 14:24:35.16: [25656]: <-- [7:ATS8=2\r] > Mar 22 14:24:35.17: [25656]: --> [2:OK] > Mar 22 14:24:35.17: [25656]: <-- [8:ATS7=60\r] > Mar 22 14:24:35.18: [25656]: --> [2:OK] > Mar 22 14:24:35.18: [25656]: <-- [6:AT&K4\r] > Mar 22 14:24:35.19: [25656]: --> [2:OK] > Mar 22 14:24:35.19: [25656]: <-- [21:AT+FCLASS=2.1;+FRY=4\r] > Mar 22 14:24:35.20: [25656]: --> [2:OK] > Mar 22 14:24:35.20: [25656]: <-- [9:AT+FLO=1\r] > Mar 22 14:24:35.21: [25656]: --> [2:OK] > Mar 22 14:24:35.21: [25656]: <-- [9:AT+FPP=0\r] > Mar 22 14:24:35.22: [25656]: --> [2:OK] > Mar 22 14:24:35.22: [25656]: <-- [9:AT+FBO=0\r] > Mar 22 14:24:35.23: [25656]: --> [2:OK] > Mar 22 14:24:35.23: [25656]: <-- [10:AT+FCT=30\r] > Mar 22 14:24:35.24: [25656]: --> [2:OK] > Mar 22 14:24:35.24: [25656]: <-- [11:AT+FCQ=1,0\r] > Mar 22 14:24:35.25: [25656]: --> [2:OK] > Mar 22 14:24:35.25: [25656]: <-- [15:AT+FNR=1,1,1,1\r] > Mar 22 14:24:35.26: [25656]: --> [2:OK] > Mar 22 14:24:35.26: [25656]: <-- [13:AT+FAP=1,1,1\r] > Mar 22 14:24:35.27: [25656]: --> [2:OK] > Mar 22 14:24:35.27: [25656]: <-- [9:AT+FIE=0\r] > Mar 22 14:24:35.28: [25656]: --> [2:OK] > Mar 22 14:24:35.28: [25656]: <-- [23:AT+FCC=1,D,2,2,3,1,0,0\r] > Mar 22 14:24:35.29: [25656]: --> [2:OK] > Mar 22 14:24:35.29: [25656]: <-- [5:ATM0\r] > Mar 22 14:24:35.30: [25656]: --> [2:OK] > Mar 22 14:24:35.30: [25656]: sched policy=1, priority=1 > Mar 22 14:24:35.30: [25656]: <-- [21:AT+FCLASS=2.1;+FRY=4\r] > Mar 22 14:24:35.41: [25656]: --> [2:OK] > Mar 22 14:24:35.41: [25656]: <-- [9:AT+FLO=1\r] > Mar 22 14:24:35.52: [25656]: --> [2:OK] > Mar 22 14:24:35.52: [25656]: <-- [9:AT+FPP=0\r] > Mar 22 14:24:35.63: [25656]: --> [2:OK] > Mar 22 14:24:35.63: [25656]: <-- [9:AT+FBO=0\r] > Mar 22 14:24:35.74: [25656]: --> [2:OK] > Mar 22 14:24:35.74: [25656]: <-- [10:AT+FCT=30\r] > Mar 22 14:24:35.85: [25656]: --> [2:OK] > Mar 22 14:24:35.85: [25656]: <-- [11:AT+FCQ=1,0\r] > Mar 22 14:24:35.96: [25656]: --> [2:OK] > Mar 22 14:24:35.96: [25656]: <-- [15:AT+FNR=1,1,1,1\r] > Mar 22 14:24:36.07: [25656]: --> [2:OK] > Mar 22 14:24:36.07: [25656]: <-- [13:AT+FAP=1,1,1\r] > Mar 22 14:24:36.18: [25656]: --> [2:OK] > Mar 22 14:24:36.18: [25656]: <-- [9:AT+FIE=0\r] > Mar 22 14:24:36.29: [25656]: --> [2:OK] > Mar 22 14:24:36.29: [25656]: <-- [23:AT+FCC=1,D,2,2,3,1,0,0\r] > Mar 22 14:24:36.40: [25656]: --> [2:OK] > Mar 22 14:24:36.40: [25656]: <-- [25:AT+FLI="+39 999 9999999"\r] > Mar 22 14:24:36.51: [25656]: --> [2:OK] > Mar 22 14:24:36.51: [25656]: DIAL 0,0123456789 > Mar 22 14:24:36.51: [25656]: <-- > [33:AT+FCC=1,,,,,,,,0;DT0,0123456789\r] > Mar 22 14:24:58.17: [25656]: --> [4:+FCO] > Mar 22 14:24:58.17: [25656]: --> [27:+FCI:" 0123456789"] > Mar 22 14:24:58.17: [25656]: REMOTE CSI "0123456789" > Mar 22 14:24:58.54: [25656]: --> [22:+FIS:3,3,0,2,1,1,0,4,0] > Mar 22 14:24:58.54: [25656]: --> [2:OK] > Mar 22 14:24:58.54: [25656]: REMOTE best rate 9600 bit/s > Mar 22 14:24:58.54: [25656]: REMOTE max page width 1728 > pixels in 215 mm > Mar 22 14:24:58.54: [25656]: REMOTE max unlimited page length > Mar 22 14:24:58.54: [25656]: REMOTE best vres 7.7 line/mm > Mar 22 14:24:58.54: [25656]: REMOTE best format 2-D MR > Mar 22 14:24:58.54: [25656]: REMOTE supports T.30 Annex A, ECM > Mar 22 14:24:58.54: [25656]: REMOTE best 20 ms, 10 ms/scanline > Mar 22 14:24:58.54: [25656]: USE 9600 bit/s > Mar 22 14:24:58.54: [25656]: USE 20 ms, 10 ms/scanline > Mar 22 14:24:58.54: [25656]: USE error correction mode > Mar 22 14:24:58.54: [25656]: SEND file "docq/doc16167.ps;41" > Mar 22 14:24:58.54: [25656]: USE page width 1728 pixels in 215 mm > Mar 22 14:24:58.54: [25656]: USE unlimited page length > Mar 22 14:24:58.54: [25656]: USE 7.7 line/mm > Mar 22 14:24:58.54: [25656]: USE 2-D MR > Mar 22 14:24:58.54: [25656]: <-- [23:AT+FIS=1,3,0,2,1,1,0,4\r] > Mar 22 14:24:58.65: [25656]: --> [2:OK] > Mar 22 14:24:58.65: [25656]: <-- [7:AT+FDT\r] > Mar 22 14:25:14.94: [25656]: --> [7:+FHS:25] > Mar 22 14:25:14.94: [25656]: REMOTE HANGUP: DCS sent 3 times > without response (code 25) > Mar 22 14:25:14.94: [25656]: --> [2:OK] > Mar 22 14:28:14.94: [25656]: MODEM <Timeout> > Mar 22 14:28:14.94: [25656]: SEND: DCS sent 3 times without > response; Giving up after 3 attempts to send same page > "docq/doc16167.ps;41", dirnum 0 > Mar 22 14:28:14.94: [25656]: <-- [5:ATH0\r] > Mar 22 14:28:15.07: [25656]: --> [2:OK] > Mar 22 14:28:15.07: [25656]: sched policy=0, priority=0 > Mar 22 14:28:15.07: [25656]: SESSION END > -- > giulioo@xxxxxxxxx > > ____________________ HylaFAX(tm) Users Mailing List > _______________________ > To subscribe/unsubscribe, click > http://lists.hylafax.org/cgi-bin/lsg2.cgi > On UNIX: mail -s unsubscribe > hylafax-users-request@xxxxxxxxxxx < /dev/null > *To learn about commercial HylaFAX(tm) support, mail > sales@xxxxxxxxx* ____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
- References:
- [hylafax-users] AT+FDT -> FHS:25 (DCS) errors
- From: Giulio Orsero
- [hylafax-users] AT+FDT -> FHS:25 (DCS) errors
- Prev by Date: [hylafax-users] AT+FDT -> FHS:25 (DCS) errors
- Next by Date: [hylafax-users] FW: Help Needed
- Previous by thread: [hylafax-users] AT+FDT -> FHS:25 (DCS) errors
- Next by thread: [hylafax-users] problems with outgoing faxes
- Index(es):
Project hosted by iFAX Solutions