Re: [hylafax-users] modem (or faxgetty?) hangs "receiving from ..."

[Aidan Van Dyk <aidan@xxxxxxxx>]

Any chance of getting an strace on it? At least at the "hung" poing?

Have you seen:
	http://bugs.hylafax.org/bugzilla/show_bug.cgi?id=455

This is fixed in cvs HEAD.

4.1.9 (when it comes) will have it.

Can you try CVS head (or apply that patch to 4.1.8)?

a.


* Patrick Fromberg <patrick.fromberg@xxxxxxxxxxxxxxx> [031205 13:36]:
> Lee Howard wrote:
> >Would you mind sharing a log with us from one of the sessions where 
> >faxgetty hangs?
> >
> >Lee.
> 
> Here it is:
> 
> Dec 04 13:33:55.33: [29411]: SESSION BEGIN 00000185 498944429004
> Dec 04 13:33:55.33: [29411]: HylaFAX (tm) Version 4.1.7
> Dec 04 13:33:55.33: [29411]: <-- [4:ATA\r]
> Dec 04 13:34:04.69: [29411]: --> [4:+FCO]
> Dec 04 13:34:04.69: [29411]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyS0'
> Dec 04 13:34:04.69: [29411]: RECV FAX: begin
> Dec 04 13:34:04.69: [29411]: RECV FAX: CDPN
> Dec 04 13:34:09.45: [29411]: --> [27:+FTI:"       +498996997388"]
> Dec 04 13:34:09.45: [29411]: REMOTE TSI "+498996997388"
> Dec 04 13:34:09.45: [29411]: --> [20:+FCS:0,5,0,2,0,0,0,0]
> Dec 04 13:34:09.45: [29411]: REMOTE wants 14400 bit/s
> Dec 04 13:34:09.45: [29411]: REMOTE wants page width 1728 pixels in 215 mm
> Dec 04 13:34:09.45: [29411]: REMOTE wants unlimited page length
> Dec 04 13:34:09.45: [29411]: REMOTE wants 3.85 line/mm
> Dec 04 13:34:09.45: [29411]: REMOTE wants 1-D MR
> Dec 04 13:34:09.45: [29411]: --> [2:OK]
> Dec 04 13:34:09.45: [29411]: <-- [7:AT+FDR\r]
> Dec 04 13:34:11.54: [29411]: --> [7:CONNECT]
> Dec 04 13:34:11.54: [29411]: RECV: begin page
> Dec 04 13:34:11.54: [29411]: RECV: send trigger 022
> Dec 04 13:34:11.54: [29411]: <-- data [1]
> Dec 04 13:34:25.50: [29411]: RECV: 24627 bytes of data, 1163 total lines
> Dec 04 16:27:01.50: [29411]: CLOSE /dev/ttyS0
> 
> Patrick
> >
> >
> >On 2003.12.04 08:38 Patrick Fromberg wrote:
> >
> >>This issue has been discussed many times already.
> >>One solution is to install patch.
> >>
> >>http://bugs.hylafax.org/bugzilla/show_bug.cgi?id=378
> >>
> >>I have done that implicitely by updating to Hyla 4.1.7.
> >>
> >>That did not solve the problem. I was using a USR Modem
> >>with Class 2.0, which I should not as I have heard.
> >>I switched to Class 1 but the problem persists. I switched
> >>to Elsa Microlink 33000 (which only does Class 2.0) and
> >>Problem still remains.
> >>
> >>Sometimes it goes fine for days and then a fax comes
> >>in and faxgetty hangs. The only way to recover
> >>is to kill -9 faxgetty pid.
> >>
> >>I have this on different machines, but they are all SuSE 8.2.
> >>
> >>I saw, that there is also a linux kernel incompatibility. Does
> >>anybody know to which kernel Version I have to update? Unfortunatley I 
> >>can not downgrade.
> >>
> >>Patrick
> >>
> >>____________________ HylaFAX(tm) Users Mailing List 
> >>_______________________
> >> To subscribe/unsubscribe, click 
> >>http://lists.hylafax.org/cgi-bin/lsg2.cgi
> >>On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < 
> >>/dev/null
> >> *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*
> >
> >
> 
> 
> ____________________ HylaFAX(tm) Users Mailing List _______________________
>  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
> On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
>  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*

Attachment: pgp00004.pgp
Description: PGP signature