Re: [hylafax-users] Multi-Tech ZMA v.92 (1.28C firmware) sending is still not right.

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

On 2003.10.15 11:32 Lee Howard wrote:

> In overseas communications we generally assume a fair amount of line 
> noise (this is not necessarily true, though).  In such situations, 
> ECM is *highly* advantageous and EOR should be enabled (AT+FRY=4 in 
> Class 2.0).  Because you should enable EOR you probably shouldn't use 
> Class 2.1 (V.34 faxing/SuperG3) because you can't do EOR with V.34.  
> If ECM is not an option (because the receiver doesn't support it)... 
> then sometimes starting out at a slower speed will help because 
> you'll eventually "slow down" to V.27 ter sooner.

Ugh.  Please change all instances of "EOR" to "CTC" in the above 
paragraph.

Lee.

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*