HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] problems with Multitech Modem MT 2834ZDXb



Thank you for the response!

I'll try setting S38 modem registry to a different value.
The default value is S38=43 and as I understand, I have to set S38=44 or S38=45


From the other hand, the advise I found on hylafax web site about
fixing receiving problems with MT2834ZDX is that I have to set S38=35.
I'm not sure if I have to increase or decrease the value of S35 reg.....

In case this doesn't help, how can I update to MT5634ZBA-V92?

Best regards:
Milen

Steve Tuckner wrote:

Milen,

I am sad to inform you that there is no active development on this product
anymore. You can tinker with the receive sensitivity, and see if it makes
any difference.

S38 controls the receive sensitivity. Its default is 43 which means -43dbm.
You could try going to 44 or 45 and see if that helps at all. As you go
lower (higher numbers), the modem will have trouble distinguishing between
noise and signal and may not drop carrier when it should.

I would recommend up dating to our MT5634ZBA-V92 if you want to use a modem
with active fax development on it.

Steve Tuckner
Multi-Tech Systems







____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*




Project hosted by iFAX Solutions