Re: [hylafax-users] HylaFax - recieve

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

On 2003.10.01 21:22 Kostik wrote:

> Oct 02 08:05:26.27: [ 1756]: REMOTE wants 9600 bit/s
> Oct 02 08:05:26.27: [ 1756]: REMOTE wants page width 1728 pixels in
> 215 mm
> Oct 02 08:05:26.27: [ 1756]: REMOTE wants unlimited page length
> Oct 02 08:05:26.27: [ 1756]: REMOTE wants 3.85 line/mm
> Oct 02 08:05:26.27: [ 1756]: REMOTE wants 2-D MR
> Oct 02 08:05:26.27: [ 1756]: --> [7:CONNECT]
> Oct 02 08:05:26.27: [ 1756]: RECV: begin page
> Oct 02 08:05:26.27: [ 1756]: RECV: send trigger 021
> Oct 02 08:05:26.27: [ 1756]: <-- data [1]
> Oct 02 08:06:46.79: [ 1756]: <-- data [1]
> Oct 02 08:06:46.79: [ 1756]: RECV: Missing EOL after 5 seconds

Notice that we don't get any data from the remote for 80 seconds... so 
either the remote is not actually sending image data, the modem's Class 
2 is broken, or we're sending the wrong trigger.  See 'man 
hylafax-config' under Class2RecvDataTrigger.

> I use mgetty as described at http://www.hylafax.org/HylaFAQ/Q343.php
> Mgetty by itself (stand-alone) recieves faxes well.

Then we can assume the modem's Class 2 is not broken and it's probably 
Class2RecvDataTrigger.

Lee.

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*