[hylafax-users] HylaFax - recieve

["Kostik" <kostik@xxxxxxx>]

Hello All,

 

I've a problem with fax recieving... The remote fax-machine sends fax(es), but they're not recieved. Logfile cut follows:

 

Oct 02 08:05:07.61: [ 1756]: SESSION BEGIN 00000007 70957184000
Oct 02 08:05:07.61: [ 1756]: HylaFAX (tm) Version 4.1.5
Oct 02 08:05:07.61: [ 1756]: <-- [4:ATA\r]
Oct 02 08:05:22.39: [ 1756]: --> [5:+FCON]
Oct 02 08:05:22.39: [ 1756]: ANSWER: FAX CONNECTION  DEVICE '/dev/cuaa0'
Oct 02 08:05:22.39: [ 1756]: RECV FAX: begin
Oct 02 08:05:22.73: [ 1756]: --> [28:+FTSI:"9567001             "]
Oct 02 08:05:22.73: [ 1756]: REMOTE TSI "9567001"
Oct 02 08:05:22.73: [ 1756]: --> [21:+FDCS:0,3,0,2,1,0,0,0]
Oct 02 08:05:22.73: [ 1756]: REMOTE wants 9600 bit/s
Oct 02 08:05:22.73: [ 1756]: REMOTE wants page width 1728 pixels in 215 mm
Oct 02 08:05:22.73: [ 1756]: REMOTE wants unlimited page length
Oct 02 08:05:22.73: [ 1756]: REMOTE wants 3.85 line/mm
Oct 02 08:05:22.73: [ 1756]: REMOTE wants 2-D MR
Oct 02 08:05:22.73: [ 1756]: --> [2:OK]
Oct 02 08:05:22.73: [ 1756]: <-- [7:AT+FDR\r]
Oct 02 08:05:25.74: [ 1756]: --> [5:+FCFR]
Oct 02 08:05:26.27: [ 1756]: --> [21:+FDCS:0,3,0,2,1,0,0,0]
Oct 02 08:05:26.27: [ 1756]: REMOTE wants 9600 bit/s
Oct 02 08:05:26.27: [ 1756]: REMOTE wants page width 1728 pixels in 215 mm
Oct 02 08:05:26.27: [ 1756]: REMOTE wants unlimited page length
Oct 02 08:05:26.27: [ 1756]: REMOTE wants 3.85 line/mm
Oct 02 08:05:26.27: [ 1756]: REMOTE wants 2-D MR
Oct 02 08:05:26.27: [ 1756]: --> [7:CONNECT]
Oct 02 08:05:26.27: [ 1756]: RECV: begin page
Oct 02 08:05:26.27: [ 1756]: RECV: send trigger 021
Oct 02 08:05:26.27: [ 1756]: <-- data [1]
Oct 02 08:06:46.79: [ 1756]: <-- data [1]
Oct 02 08:06:46.79: [ 1756]: RECV: Missing EOL after 5 seconds
Oct 02 08:06:46.80: [ 1756]: REMOTE HANGUP: Missing EOL after 5 seconds (section 3.2/T.4) (code 91)
Oct 02 08:06:46.80: [ 1756]: RECV FAX (00000007): recvq/fax00003.tif from 9567001, route to <unspecified>, 0 pages in 1:24
Oct 02 08:06:46.80: [ 1756]: RECV FAX: Missing EOL after 5 seconds (section 3.2/T.4)
Oct 02 08:06:46.80: [ 1756]: <-- [6:AT+FK\r]
Oct 02 08:06:46.91: [ 1756]: --> [4:RING]
Oct 02 08:06:46.91: [ 1756]: MODEM Ring
Oct 02 08:06:46.91: [ 1756]: RECV FAX (00000007): session with 9567001 terminated abnormally: Missing EOL after 5 seconds (section 3.2/T.4)
Oct 02 08:06:46.91: [ 1756]: RECV FAX: bin/faxrcvd "recvq/fax00003.tif" "cuaa0" "00000007" "Missing EOL after 5 seconds (section 3.2/T.4)" "" ""
Oct 02 08:06:47.10: [ 1756]: RECV FAX: end
Oct 02 08:06:47.10: [ 1756]: SESSION END

I use mgetty as described at http://www.hylafax.org/HylaFAQ/Q343.php

Mgetty by itself (stand-alone) recieves faxes well.

Remote fax-machine operates finely with another faxes and programs...

 

Could anybody show me, what's wrong?...

 

Thanks all...