Re: [hylafax-users] DID

[Matthew Hattersley <MatthewHattersley@businessserve.co.uk>]

To sumize, im not familiar with the Hylafax way of doing things.... I;ve got
a redhat 8 box with a eicon 30, which will be chucked into a DID compat
trunk. Ive installed the cards and drivers etc.... used the add modem script
to about 8 of the virtual tty's, and I was a bit lost as to the next step...
Im going to go away and read the man pages, I was hoping to find a nice
howto on it, however it seems Ill have to do it via man pages.... no biggie.

Cheers for the pointer

Mat

-----Original Message-----
From: Lee Howard [mailto:faxguy@howardsilvan.com]
Sent: 23 June 2003 16:52
To: Matthew Hattersley
Cc: hylafax-users@hylafax.org
Subject: Re: [hylafax-users] DID


On 2003.06.23 08:36 Matthew Hattersley wrote:
> thats good to know, thanyou VERY much... I thought for a second that
> id
> screwed up somewhere.
> 
> However after trawling, I cannot find any docs... im not asking to be
> spoon
> fed here.... just a pointer

I'm not quite sure what you want to know.  All of the information on 
utilizing DID is in the "docs" (the 'man' pages).

You have faxgetty catch the DID digits just as you would have it catch 
CID information.  You configure it exactly the same way, by setting up 
QualifyCID and either CIDName or CIDNumber (or both) in your config 
file.  Then you route by CIDName or CIDNumber in faxrcvd (FaxDispatch).

'man cid', 'man hylafax-config', and 'man faxrcvd' should get you there.

I'm happy to help, just I don't know *what* you're having problems with.

Lee.

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*