[hylafax-users] FW: comrec error

[Steve Tuckner <STUCKNER@MULTITECH.COM>]

The MT1432BA was a fine modem in its day (which was over 10 years ago). Now
I would recommend a MT5634ZBA-V92 if you want to go with a Multi-Tech modem.
It does classes 1, 1.0, 2, 2.0, and 2.1. It supports V.34 faxing and in
class 2.x modem supports real time fax conversion compression. It also works
fine in class 1 mode if that's how you would like to run it.

There is no active development on the MT1432BA, so your issue will most
likely not be addressed.

Steve Tuckner
Multi-Tech Systems

> -----Original Message-----
> From: hylafax-users-bounce@hylafax.org
> [mailto:hylafax-users-bounce@hylafax.org]On Behalf Of Lee Howard
> Sent: Tuesday, June 03, 2003 3:13 PM
> To: Justin Kay
> Cc: 'Lee Howard'; 'hylafax-users@hylafax.org'
> Subject: Re: [hylafax-users] comrec error
>
>
> On 2003.06.03 13:00 Justin Kay wrote:
> > I was under the impression that these multitech modems were the best
> > modems
> > for use with hylafax, that's why I got this one.
>
> In its day I'm sure the MT1432 was a great modem.  I never owned one,
> myself.  I saw one at the thrift store the other day, but it didn't
> have a power supply.  A lot of people swore by these things
> in the past
> - probably with just cause, but the problem you're seeing is
> a firmware
> matter... and as I said, you'll need to bring it up with MultiTech to
> get a fix, switch to Class 1, or get a new modem.
>
> > Will this modem use
> > class
> > 1?
>
> probemodem -s 38400 -f -c "AT+FCLASS=?" ttyS0
>
> > I thought that it was a class 2.0 modem.  The firmware is
> 114b, which
> > I
> > though was ok because it says use 109 or better.
>
> Apparently it's not ok.
>
> Lee.
>
> ____________________ HylaFAX(tm) Users Mailing List
> _______________________
>   To subscribe/unsubscribe, click
> http://lists.hylafax.org/cgi-bin/lsg2.cgi
>  On UNIX: mail -s unsubscribe
> hylafax-users-request@hylafax.org < /dev/null
>   *To learn about commercial HylaFAX(tm) support, mail
> sales@hylafax.org.*

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*